耐火材料
耐火材料
내화재료
REFRACTORIES
2014年
4期
245-248
,共4页
逾渗模型%石墨-尖晶石%导电性%渣渗透
逾滲模型%石墨-尖晶石%導電性%渣滲透
유삼모형%석묵-첨정석%도전성%사삼투
percolation model%graphite-spinel%electric conductivity%slag-penetration
为了探讨含碳耐火材料的导电性和渣渗透与组成的关系,采用w(C)=98%的石墨、纯度为99%(w)的富铝尖晶石为主要原料,以石墨添加质量分数分别为5%、10%、15%、20%、40%、60%的富铝尖晶石-碳试样研究了其导电性与组成的关系,以石墨添加质量分数分别为10%、20%、30%、35%、40%、60%、80%、100%的试样研究了其抗渣性与组成的关系。结果表明,富铝尖晶石-石墨试样的导电性及渣渗透性与组成的关系都符合逾渗模型,其导电性的逾渗阈值为14.3%(石墨的体积分数),而抗渣性的逾渗阈值为56.4%(尖晶石+孔隙的体积分数),且在逾渗阈值附近,材料的导电性对成型压力较为敏感。
為瞭探討含碳耐火材料的導電性和渣滲透與組成的關繫,採用w(C)=98%的石墨、純度為99%(w)的富鋁尖晶石為主要原料,以石墨添加質量分數分彆為5%、10%、15%、20%、40%、60%的富鋁尖晶石-碳試樣研究瞭其導電性與組成的關繫,以石墨添加質量分數分彆為10%、20%、30%、35%、40%、60%、80%、100%的試樣研究瞭其抗渣性與組成的關繫。結果錶明,富鋁尖晶石-石墨試樣的導電性及渣滲透性與組成的關繫都符閤逾滲模型,其導電性的逾滲閾值為14.3%(石墨的體積分數),而抗渣性的逾滲閾值為56.4%(尖晶石+孔隙的體積分數),且在逾滲閾值附近,材料的導電性對成型壓力較為敏感。
위료탐토함탄내화재료적도전성화사삼투여조성적관계,채용w(C)=98%적석묵、순도위99%(w)적부려첨정석위주요원료,이석묵첨가질량분수분별위5%、10%、15%、20%、40%、60%적부려첨정석-탄시양연구료기도전성여조성적관계,이석묵첨가질량분수분별위10%、20%、30%、35%、40%、60%、80%、100%적시양연구료기항사성여조성적관계。결과표명,부려첨정석-석묵시양적도전성급사삼투성여조성적관계도부합유삼모형,기도전성적유삼역치위14.3%(석묵적체적분수),이항사성적유삼역치위56.4%(첨정석+공극적체적분수),차재유삼역치부근,재료적도전성대성형압력교위민감。
Alumina-rich spinel-carbon specimens were prepared using graphite (C content is 98%,in mass,the same hereinafter)and alumina-rich spinel (the purity is 99%)as main starting materials to find the effects of composition on electric conductivity and slag-penetration of carbon containing refractories. The specimens with different graphite additions (5%,10%,15%,20%,40% and 60%)were used to ana-lyze relationship between electric conductivity and composition,and those with different graphite additions (10%,20%,30%,35%,40%,60%,80% and 100%)were used to analyze the relationship between slag-penetration and composition.It is found that two relationships can be described by percolation model;the percolation threshold of electric conductivity is 14.3%(volume fraction of graphite)and that of slag-pene-tration is 56.4% (volume fraction of spinel and pore),and the electric conductivity is sensible to shaping pressure when it nears the percolation threshold.