中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2014年
8期
2694-2702
,共9页
姚云%谢刚%侯彦青%李荣兴%罗伟红%彭如振%于站良
姚雲%謝剛%侯彥青%李榮興%囉偉紅%彭如振%于站良
요운%사강%후언청%리영흥%라위홍%팽여진%우참량
噪声能消耗%NiO/Fe2O3粉体%行星式球磨%平均粒度
譟聲能消耗%NiO/Fe2O3粉體%行星式毬磨%平均粒度
조성능소모%NiO/Fe2O3분체%행성식구마%평균립도
noisy-power dissipation%NiO/Fe2O3 powder%planetary ball mill%mean particle size
研究NiO/Fe2O3湿式混合与球磨过程中的噪声能消耗、球磨效率及二者之间的关系。结果表明,球磨工艺的最佳工艺参数为:填水率64.10%~85.47%,小/大球个数比360/20,球磨机转速300.9 r/min,填粉率约10.88%,填球率20.53%~23.88%,球磨时间6 h。引入离散元法(DEM)分析球磨过程中噪声能消耗与球磨效率之间的关系,得到噪声能消耗与填球率关系的经验方程。研究表明粉体的平均粒度随着噪声能的消耗而减小,而球磨效率和球碰撞能的利用率则随着噪声能消耗的增加而减小。
研究NiO/Fe2O3濕式混閤與毬磨過程中的譟聲能消耗、毬磨效率及二者之間的關繫。結果錶明,毬磨工藝的最佳工藝參數為:填水率64.10%~85.47%,小/大毬箇數比360/20,毬磨機轉速300.9 r/min,填粉率約10.88%,填毬率20.53%~23.88%,毬磨時間6 h。引入離散元法(DEM)分析毬磨過程中譟聲能消耗與毬磨效率之間的關繫,得到譟聲能消耗與填毬率關繫的經驗方程。研究錶明粉體的平均粒度隨著譟聲能的消耗而減小,而毬磨效率和毬踫撞能的利用率則隨著譟聲能消耗的增加而減小。
연구NiO/Fe2O3습식혼합여구마과정중적조성능소모、구마효솔급이자지간적관계。결과표명,구마공예적최가공예삼수위:전수솔64.10%~85.47%,소/대구개수비360/20,구마궤전속300.9 r/min,전분솔약10.88%,전구솔20.53%~23.88%,구마시간6 h。인입리산원법(DEM)분석구마과정중조성능소모여구마효솔지간적관계,득도조성능소모여전구솔관계적경험방정。연구표명분체적평균립도수착조성능적소모이감소,이구마효솔화구팽당능적이용솔칙수착조성능소모적증가이감소。
The relationship between the efficiency of NiO/Fe2O3 wet grinding and noisy-power dissipation was studied. The optimal grinding parameters were found as:a slurry water content of 64.10%-85.47%, ball number ratio of 360/20, revolution speed of 300.9 r/min, powder-filling ratio of 10.88%, ball-filling ratio of 20.53%-23.88%, and grinding time of approximately 6 h. The discrete element method (DEM) was employed to analyze relationship between the noisy-power dissipation and the grinding efficiency, and equations describing the relationship were derived. The mean particle size of the ground powder decreased with a decrease in the degree of noisy-power dissipation, while the grinding efficiency and the amount of specific impact power used decreased with an increase in the degree of noisy-power dissipation.