冶金分析
冶金分析
야금분석
METALLURGICAL ANALYSIS
2014年
8期
45-49
,共5页
兰苑培%刘清才%杨剑%蒋光旭%钱强%杨强%张天龙
蘭苑培%劉清纔%楊劍%蔣光旭%錢彊%楊彊%張天龍
란원배%류청재%양검%장광욱%전강%양강%장천룡
钢渣%磁性铁%比重法%测定
鋼渣%磁性鐵%比重法%測定
강사%자성철%비중법%측정
steel slag%magnetic iron%specific gravity method%determination
准确测定钢渣中的磁性铁含量有利于提高钢渣磁选效率和评价磁选工艺的磁性铁回收效率.实验采用多级磁选分离的方法,通过测定钢渣磁选物以及尾渣的密度,并假设钢渣磁选物中非磁性相的密度与尾矿渣的密度相同,从而达到测定钢渣中的磁性铁含量的目的.实验选取了转炉渣、脱硫渣作为研究对象,分别测得两种钢渣的磁性铁含量为3.81%和3.72%(质量分数),平均误差为3.93%,并使用了行业标准(YB/T 140和YB/T 4188 2009)验证了测定结果的可靠性.XRD测定结果表明,磁选物的物相中含有较多磁性物,且钢渣的物相与尾渣一致,证明了测定方法假设是可行的.
準確測定鋼渣中的磁性鐵含量有利于提高鋼渣磁選效率和評價磁選工藝的磁性鐵迴收效率.實驗採用多級磁選分離的方法,通過測定鋼渣磁選物以及尾渣的密度,併假設鋼渣磁選物中非磁性相的密度與尾礦渣的密度相同,從而達到測定鋼渣中的磁性鐵含量的目的.實驗選取瞭轉爐渣、脫硫渣作為研究對象,分彆測得兩種鋼渣的磁性鐵含量為3.81%和3.72%(質量分數),平均誤差為3.93%,併使用瞭行業標準(YB/T 140和YB/T 4188 2009)驗證瞭測定結果的可靠性.XRD測定結果錶明,磁選物的物相中含有較多磁性物,且鋼渣的物相與尾渣一緻,證明瞭測定方法假設是可行的.
준학측정강사중적자성철함량유리우제고강사자선효솔화평개자선공예적자성철회수효솔.실험채용다급자선분리적방법,통과측정강사자선물이급미사적밀도,병가설강사자선물중비자성상적밀도여미광사적밀도상동,종이체도측정강사중적자성철함량적목적.실험선취료전로사、탈류사작위연구대상,분별측득량충강사적자성철함량위3.81%화3.72%(질량분수),평균오차위3.93%,병사용료행업표준(YB/T 140화YB/T 4188 2009)험증료측정결과적가고성.XRD측정결과표명,자선물적물상중함유교다자성물,차강사적물상여미사일치,증명료측정방법가설시가행적.