航空制造技术
航空製造技術
항공제조기술
AERONAUTICAL MANUFACTURING TECHNOLOGY
2014年
16期
57-60,64
,共5页
吴志明%吴坚定%马正斌%陈巍%董春林%栾国红
吳誌明%吳堅定%馬正斌%陳巍%董春林%欒國紅
오지명%오견정%마정빈%진외%동춘림%란국홍
搅拌摩擦焊%对搭接接头%Hook缺陷%材料流动
攪拌摩抆銲%對搭接接頭%Hook缺陷%材料流動
교반마찰한%대탑접접두%Hook결함%재료류동
Friction stir welding%Butt-overlap joint%Hook defect%Material lfow
对厚度为16mm与20mm的6082铝合金对搭接接头进行搅拌摩擦焊接试验,结果表明,对搭接接头搅拌摩擦焊接工艺参数可调范围较宽,搅拌头旋转速度在300~600r/min及焊接速度在60~200mm/min条件下,能够获得完整无缺陷的焊接接头。搭接面处于前进侧时,Hook缺陷向上偏转,角度大于90°;搭接面处于后退侧时,Hook缺陷向下偏转,角度小于45°。
對厚度為16mm與20mm的6082鋁閤金對搭接接頭進行攪拌摩抆銲接試驗,結果錶明,對搭接接頭攪拌摩抆銲接工藝參數可調範圍較寬,攪拌頭鏇轉速度在300~600r/min及銲接速度在60~200mm/min條件下,能夠穫得完整無缺陷的銲接接頭。搭接麵處于前進側時,Hook缺陷嚮上偏轉,角度大于90°;搭接麵處于後退側時,Hook缺陷嚮下偏轉,角度小于45°。
대후도위16mm여20mm적6082려합금대탑접접두진행교반마찰한접시험,결과표명,대탑접접두교반마찰한접공예삼수가조범위교관,교반두선전속도재300~600r/min급한접속도재60~200mm/min조건하,능구획득완정무결함적한접접두。탑접면처우전진측시,Hook결함향상편전,각도대우90°;탑접면처우후퇴측시,Hook결함향하편전,각도소우45°。
The butt-overlap joint of 6082 alu-minum alloy by friction stir welding is investigated. The results show that defect-free joint can be obtained using different rotation speeds (300-600r/min) and different welding speeds (60-200mm/min). When the overlap re-gion is in AS, Hook defect delfects towards the weld sur-face with a larger angle (>90°). However, when the overlap region is in RS, Hook defect delfects towards the weld foot with a smaller angle (>45°).