石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2014年
5期
75-79
,共5页
深斜井%有杆泵井%三维%杆柱力学%偏磨
深斜井%有桿泵井%三維%桿柱力學%偏磨
심사정%유간빙정%삼유%간주역학%편마
deep deviated wells%rod pump wells%3D%rod mechanics%application%eccentric wear
随着深层油藏的开发和绿色油田的推进,深井、大斜度井、丛式井日益增多,复杂井眼条件下有杆泵井举升存在偏磨严重,检泵周期缩短的问题,杆管偏磨机理一直没有得到较好解决。考虑井眼轨迹、流体黏滞阻力以及扶正器的影响,建立了三维杆柱动力学模型,通过求解得到了三维侧向力的动态分布规律。计算结果表明,抽油杆中和点以下侧向力方向易发生周期性变化,解释了杆柱偏磨的原因;侧向力方向周期变化会引起的杆管碰撞,也是加剧中合点以下杆管偏磨的重要原因。定量分析了多个参数对侧向力的影响,为防偏磨生产参数设计提供了理论依据。
隨著深層油藏的開髮和綠色油田的推進,深井、大斜度井、叢式井日益增多,複雜井眼條件下有桿泵井舉升存在偏磨嚴重,檢泵週期縮短的問題,桿管偏磨機理一直沒有得到較好解決。攷慮井眼軌跡、流體黏滯阻力以及扶正器的影響,建立瞭三維桿柱動力學模型,通過求解得到瞭三維側嚮力的動態分佈規律。計算結果錶明,抽油桿中和點以下側嚮力方嚮易髮生週期性變化,解釋瞭桿柱偏磨的原因;側嚮力方嚮週期變化會引起的桿管踫撞,也是加劇中閤點以下桿管偏磨的重要原因。定量分析瞭多箇參數對側嚮力的影響,為防偏磨生產參數設計提供瞭理論依據。
수착심층유장적개발화록색유전적추진,심정、대사도정、총식정일익증다,복잡정안조건하유간빙정거승존재편마엄중,검빙주기축단적문제,간관편마궤리일직몰유득도교호해결。고필정안궤적、류체점체조력이급부정기적영향,건립료삼유간주동역학모형,통과구해득도료삼유측향력적동태분포규률。계산결과표명,추유간중화점이하측향력방향역발생주기성변화,해석료간주편마적원인;측향력방향주기변화회인기적간관팽당,야시가극중합점이하간관편마적중요원인。정량분석료다개삼수대측향력적영향,위방편마생산삼수설계제공료이론의거。
With the development of deep reservoirs and promotion of green oilifelds, there is an increasing number of deep wells, highly-deviated wells, cluster wells, etc. The rod pump wells under complex wellbore conditions have such problems as severe eccentric wear, short pump inspection period and that the rod eccentric wear mechanism has not satisfactorily addressed. Based on the effects of wellbore trajectory, lfuid viscous resistance and centralizers, a 3D rod mechanic model was built, and the dynamic distribution regular-ity of 3D lateral force was solved. The calculations show that the direction of lateral force below the neutral point on the rod is prone to periodic change, which explains the rod eccentric wear. The periodic change in lateral force may cause rod collision, which is a key reason for severe rod eccentric wear below the neutral point. Quantitative analysis was conducted to the effect of a number of parameters on the lateral force, providing theoretical basis for the design of anti-eccentric production parameters.