光电技术应用
光電技術應用
광전기술응용
ELECTRO-OPTIC WARFARE & RADAR PASSIVE COUNTERMEASURES
2014年
4期
34-38
,共5页
黄翀%许国栋%杨玮枫%欧阳艳东%吴永俊
黃翀%許國棟%楊瑋楓%歐暘豔東%吳永俊
황충%허국동%양위풍%구양염동%오영준
负性VA-LCD%阈值特性%三基色%驱动电压
負性VA-LCD%閾值特性%三基色%驅動電壓
부성VA-LCD%역치특성%삼기색%구동전압
negative VA-LCD%threshold characteristic%three primary colors%driving voltage
彩色液晶显示器件(CLCD),在相同电压驱动条件下各波长透射率有很大的差别,从而引起图像显示的色彩饱和度或还原性不够。用UV-Vis8500型双光束紫外/可见分光光度计测量在不同电压驱动下负性VA-LCD的电光特性,对三基色的阈值特性和阈值特性随波长变化关系进行分析。结果表明,阈值电压Vth,饱和电压Vsat和中值电压V50都是随着波长的增加而逐渐增大,并且饱和电压与阈值电压之差随着波长的增加而变大。对常用三种中心波长500.0 nm、550.0 nm和600.0 nm的中值电压V50作为驱动电压进行分析,其结果为CLCD选取驱动电压提供一定的指导作用。
綵色液晶顯示器件(CLCD),在相同電壓驅動條件下各波長透射率有很大的差彆,從而引起圖像顯示的色綵飽和度或還原性不夠。用UV-Vis8500型雙光束紫外/可見分光光度計測量在不同電壓驅動下負性VA-LCD的電光特性,對三基色的閾值特性和閾值特性隨波長變化關繫進行分析。結果錶明,閾值電壓Vth,飽和電壓Vsat和中值電壓V50都是隨著波長的增加而逐漸增大,併且飽和電壓與閾值電壓之差隨著波長的增加而變大。對常用三種中心波長500.0 nm、550.0 nm和600.0 nm的中值電壓V50作為驅動電壓進行分析,其結果為CLCD選取驅動電壓提供一定的指導作用。
채색액정현시기건(CLCD),재상동전압구동조건하각파장투사솔유흔대적차별,종이인기도상현시적색채포화도혹환원성불구。용UV-Vis8500형쌍광속자외/가견분광광도계측량재불동전압구동하부성VA-LCD적전광특성,대삼기색적역치특성화역치특성수파장변화관계진행분석。결과표명,역치전압Vth,포화전압Vsat화중치전압V50도시수착파장적증가이축점증대,병차포화전압여역치전압지차수착파장적증가이변대。대상용삼충중심파장500.0 nm、550.0 nm화600.0 nm적중치전압V50작위구동전압진행분석,기결과위CLCD선취구동전압제공일정적지도작용。
The electro-optical characteristics of negative VA-LCD driven by different voltage are measured by UV-Vis8500 double beam ultraviolet (UV)/visible spectrophotometer. The threshold characteristics of three prima-ry colors and the characteristics variation with wavelength are analyzed. The results show that threshold voltage (Vth), saturation voltage (Vsat) and mid-value voltage (V50) all increase gradually with the increasing of wavelength. And the difference between Vsat and Vth becomes larger gradually with the increasing of wavelength. Common used mean voltage V50 of three kinds of central wavelength such as 500.0 nm, 550.0 nm and 600.0 nm is taken as driving voltage to analyze. The results can provide certain guidance for choosing the driving voltage of colorful liquid crys-tal display (CLCD).