电子工艺技术
電子工藝技術
전자공예기술
ELECTRONICS PROCESS TECHNOLOGY
2014年
5期
294-297
,共4页
被釉不锈钢基体%加热器%电子浆料%图形设计
被釉不鏽鋼基體%加熱器%電子漿料%圖形設計
피유불수강기체%가열기%전자장료%도형설계
Stainless steel substrate%Heater%Electronic paste%Process design
被釉不锈钢基体加热器是一种高效节能加热器具，与传统电阻丝加热管相比，不锈钢基体加热器热转换效率提高30%左右。随着国产不锈钢基体加热器用电子浆料的逐渐成熟，加热器成本大幅度降低。目前，被釉不锈钢基体加热器与专用电子浆料互动发展，使国内不锈钢基体加热器呈现良好的发展态势。论述了被釉不锈钢加热器制备的材料选用及制备工艺。
被釉不鏽鋼基體加熱器是一種高效節能加熱器具，與傳統電阻絲加熱管相比，不鏽鋼基體加熱器熱轉換效率提高30%左右。隨著國產不鏽鋼基體加熱器用電子漿料的逐漸成熟，加熱器成本大幅度降低。目前，被釉不鏽鋼基體加熱器與專用電子漿料互動髮展，使國內不鏽鋼基體加熱器呈現良好的髮展態勢。論述瞭被釉不鏽鋼加熱器製備的材料選用及製備工藝。
피유불수강기체가열기시일충고효절능가열기구，여전통전조사가열관상비，불수강기체가열기열전환효솔제고30%좌우。수착국산불수강기체가열기용전자장료적축점성숙，가열기성본대폭도강저。목전，피유불수강기체가열기여전용전자장료호동발전，사국내불수강기체가열기정현량호적발전태세。논술료피유불수강가열기제비적재료선용급제비공예。
Stainless steel heater is an energy-efficient heating appliance. The energy-efficient is raised about 30 percent, compared with the traditional heating resistance wire tube. With the mature of domestic stainless steel heating electronic paste, the costs of heater were reduced significantly. Currently, stainless steel heater and stainless steel matrix slurry are developing interactively, showing a good momentum of development. The materials of stainless steel heater and heater preparation process was discussed.
