机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2014年
16期
53-55,58
,共4页
胡佳成%李加福%李敏%张荣法%李东升
鬍佳成%李加福%李敏%張榮法%李東升
호가성%리가복%리민%장영법%리동승
稳压气源%模糊PID控制%二级串联控制
穩壓氣源%模糊PID控製%二級串聯控製
은압기원%모호PID공제%이급천련공제
Stable pressure source%Fuzzy PID control%Two series control
利用高压气体来进行润滑的方式在精密机械领域得到了广泛应用。为此,采用PID算法、二级串联控制,设计了一种仪用高稳定度气体压力源。简单介绍了稳压气源的软、硬件设计方案,分析了气源的整体性能测试结果。实验结果表明:该系统的PID参数的初始最佳取值为KP =0.6,KI =2,KD =0;流量在0~15 L/min内,该系统可以获得一个较为理想的稳定状态,且相对误差小于2%。
利用高壓氣體來進行潤滑的方式在精密機械領域得到瞭廣汎應用。為此,採用PID算法、二級串聯控製,設計瞭一種儀用高穩定度氣體壓力源。簡單介紹瞭穩壓氣源的軟、硬件設計方案,分析瞭氣源的整體性能測試結果。實驗結果錶明:該繫統的PID參數的初始最佳取值為KP =0.6,KI =2,KD =0;流量在0~15 L/min內,該繫統可以穫得一箇較為理想的穩定狀態,且相對誤差小于2%。
이용고압기체래진행윤활적방식재정밀궤계영역득도료엄범응용。위차,채용PID산법、이급천련공제,설계료일충의용고은정도기체압력원。간단개소료은압기원적연、경건설계방안,분석료기원적정체성능측시결과。실험결과표명:해계통적PID삼수적초시최가취치위KP =0.6,KI =2,KD =0;류량재0~15 L/min내,해계통가이획득일개교위이상적은정상태,차상대오차소우2%。
The lubrication method of high pressure gas has been widely applied in the field of precision machinery.Therefore, stable pressure source with high accuracy for instruments was designed using fuzzy PID algorithm and two series control scheme.The software and hardware of the stable pressure source were introduced.And the experimental results of overall performance of the gas source were analyzed.The results show that:the top argument of the PID parameters is KP =0.6,KI =2,KD =0.Meanwhile,the flow rate within the scope of 5 ~15 L/min,the system can obtain a more ideal steady-state,and the relative error is less than 2%.