锻压装备与制造技术
鍛壓裝備與製造技術
단압장비여제조기술
METALFORMING MACHINERY
2014年
4期
13-17
,共5页
闭式压力机%组合机身%接触%预紧力%试验
閉式壓力機%組閤機身%接觸%預緊力%試驗
폐식압력궤%조합궤신%접촉%예긴력%시험
Closed press%Combined frame%Contact%Pre-tightening force%Test
针对闭式压力机组合机身传统设计计算方法存在的问题,利用接触分析理论与方法对机身接触面的接触非线性问题进行研究.对组合机身拉紧螺杆的预紧力进行分析计算,获得了较为可靠的机身计算模型.对计算模型进行数值模拟,得出其在受载状态下的应力与变形的计算结果.利用仪器对机床进行试验,将测试结果与计算结果进行对比,最终证明分析方法的可行性.
針對閉式壓力機組閤機身傳統設計計算方法存在的問題,利用接觸分析理論與方法對機身接觸麵的接觸非線性問題進行研究.對組閤機身拉緊螺桿的預緊力進行分析計算,穫得瞭較為可靠的機身計算模型.對計算模型進行數值模擬,得齣其在受載狀態下的應力與變形的計算結果.利用儀器對機床進行試驗,將測試結果與計算結果進行對比,最終證明分析方法的可行性.
침대폐식압력궤조합궤신전통설계계산방법존재적문제,이용접촉분석이론여방법대궤신접촉면적접촉비선성문제진행연구.대조합궤신랍긴라간적예긴력진행분석계산,획득료교위가고적궤신계산모형.대계산모형진행수치모의,득출기재수재상태하적응력여변형적계산결과.이용의기대궤상진행시험,장측시결과여계산결과진행대비,최종증명분석방법적가행성.