苏州市职业大学学报
囌州市職業大學學報
소주시직업대학학보
JOURNAL OF SUZHOU VOCATIONAL UNIVERSITY
2014年
3期
26-30
,共5页
管道探测微机器人%无线输能%整流天线
管道探測微機器人%無線輸能%整流天線
관도탐측미궤기인%무선수능%정류천선
in-pipe inspect micromachine%wireless power transmission%rectenna
设计一个金属管道中无缆探测微机器人微波供电系统,系统利用微波在圆波导中的传输基本原理,解决微波在工业不锈钢管道(直径20 mm)传输中的极化和能量传输的不稳定性问题.管道中微机器人供电单元--整流天线接收微波能量并转换成直流作为其电源,接收天线采用圆极化微带贴片天线,整流电路采用倍压电路以提高输出功率,最终试验测得在24.5 dBm输入功率下(直流负载为300Ω),整流输出86.8 mW直流功率,能够保证机器人驱动电机正常工作.
設計一箇金屬管道中無纜探測微機器人微波供電繫統,繫統利用微波在圓波導中的傳輸基本原理,解決微波在工業不鏽鋼管道(直徑20 mm)傳輸中的極化和能量傳輸的不穩定性問題.管道中微機器人供電單元--整流天線接收微波能量併轉換成直流作為其電源,接收天線採用圓極化微帶貼片天線,整流電路採用倍壓電路以提高輸齣功率,最終試驗測得在24.5 dBm輸入功率下(直流負載為300Ω),整流輸齣86.8 mW直流功率,能夠保證機器人驅動電機正常工作.
설계일개금속관도중무람탐측미궤기인미파공전계통,계통이용미파재원파도중적전수기본원리,해결미파재공업불수강관도(직경20 mm)전수중적겁화화능량전수적불은정성문제.관도중미궤기인공전단원--정류천선접수미파능량병전환성직류작위기전원,접수천선채용원겁화미대첩편천선,정류전로채용배압전로이제고수출공솔,최종시험측득재24.5 dBm수입공솔하(직류부재위300Ω),정류수출86.8 mW직류공솔,능구보증궤기인구동전궤정상공작.
This paper designs a microwave energy supply system for in-metal-pipe inspection micromachines. Based on the theory of microwave transmission in circular waveguide,this system solves the problems of the pipes polarization and microwave power transmission in stability.As the power supply unit for micromachine, the rectenna receives microwave power and converts it to DC.A circularly polarized microstrip patch antenna is used as the receiving antenna.In order to improve output power,the circuit applies four doubler circuits as its rectifying circuit.With an input power level of 24.5 dBm,the end testing output power is 86.8 mW(300Ω),and this power enables the micromachine to work well.