CAJ | 학술논문

针对热油泵 P208频繁的故障检修，对其机械密封的失效原因进行分析。在冲洗系统结构不变的情况下，通过将 P208机封压盖上的冲洗孔孔径适当加大、摒弃动环辅助密封圈、轴套尾部增设底套、将摩擦副材质改为硬质合金等措施，很好地解决了失效问题，大大延长了 P208的运行周期。
침대열유빙 P208빈번적고장검수，대기궤계밀봉적실효원인진행분석。재충세계통결구불변적정황하，통과장 P208궤봉압개상적충세공공경괄당가대、병기동배보조밀봉권、축투미부증설저투、장마찰부재질개위경질합금등조시，흔호지해결료실효문제，대대연장료 P208적운행주기。
Aimed at the frequent fault maintenance on hot oil pump P208, failure causes for mechanical seal of the pump were analyzed.Under the condition of not changing the structure of the flushing system, the following measures were adopted such as increasing suitably the diame -ter of the flushing hole in mechanical seal cover, getting rid of the movable assistant sealing ring, increasing bottom sheath on tail of the roller cover , changing friction assistant material into hard alloy and etc, which solved the failure problem and prolonged greatly running period of the P208 pump.