东北农业大学学报
東北農業大學學報
동북농업대학학보
JOURNAL OF NORTHEAST AGRICULTURAL UNIVERSITY
2014年
9期
106-110
,共5页
王德福%单瑞霞%何袁%李利桥%张美玲%历雪
王德福%單瑞霞%何袁%李利橋%張美玲%歷雪
왕덕복%단서하%하원%리리교%장미령%력설
玉米秸秆%分离加工%定量喂入%结构%试验
玉米秸稈%分離加工%定量餵入%結構%試驗
옥미갈간%분리가공%정량위입%결구%시험
corn stalk%separation process%quantitative feeding%structure%experiment
为提高玉米秸秆皮穰分离机喂入效率,设计定量喂入装置并进行试验研究。利用二次回归正交旋转组合设计方法对影响该装置喂入性能主要因素(输出辊转速、输出辊与限料辊速比、输送辊与输出辊速比、输出口间隙)进行4因子试验,以通过率和重叠率作为评价指标。结果表明,定量喂入装置的主要结构和运动参数较优组合为:输出辊转速360~380 r·min-1,输出辊与限料辊速比0.8~0.9,输送辊与输出辊速比0.8~0.9,输出口间隙约45 mm。经试验验证,在此参数组合下,通过率可达99%以上,重叠率低于1%。
為提高玉米秸稈皮穰分離機餵入效率,設計定量餵入裝置併進行試驗研究。利用二次迴歸正交鏇轉組閤設計方法對影響該裝置餵入性能主要因素(輸齣輥轉速、輸齣輥與限料輥速比、輸送輥與輸齣輥速比、輸齣口間隙)進行4因子試驗,以通過率和重疊率作為評價指標。結果錶明,定量餵入裝置的主要結構和運動參數較優組閤為:輸齣輥轉速360~380 r·min-1,輸齣輥與限料輥速比0.8~0.9,輸送輥與輸齣輥速比0.8~0.9,輸齣口間隙約45 mm。經試驗驗證,在此參數組閤下,通過率可達99%以上,重疊率低于1%。
위제고옥미갈간피양분리궤위입효솔,설계정량위입장치병진행시험연구。이용이차회귀정교선전조합설계방법대영향해장치위입성능주요인소(수출곤전속、수출곤여한료곤속비、수송곤여수출곤속비、수출구간극)진행4인자시험,이통과솔화중첩솔작위평개지표。결과표명,정량위입장치적주요결구화운동삼수교우조합위:수출곤전속360~380 r·min-1,수출곤여한료곤속비0.8~0.9,수송곤여수출곤속비0.8~0.9,수출구간극약45 mm。경시험험증,재차삼수조합하,통과솔가체99%이상,중첩솔저우1%。
Automatic feeding device was needed for improving efficiency of rind-pith separation equipment for corn stalk. Thus, the quantitative feeding device for corn stalk was designed and studied in the paper. Experiment on four factors-rotation speed of outlet rol , ratio between outlet rol and blocking rol , ratio between conveying rol and outlet rol , and outlet distance was carried out by regression of four-factor quadratics rotary orthogonal combination, and the pass rate and overlap rate were chosen as evaluation indexes. By experiments, optimum parameters in structure and motion for the feeding device showed that, rotation speed of output rol 360-380 r·min-1, ratio between output rol and blocking rol 0.8-0.9, ratio between conveying rol and outlet rol 0.8-0.9, outlet distance about 45 mm. According to the parameters, the pass rate was about 99%, the overlap rate was less than 1%.