鞍钢技术
鞍鋼技術
안강기술
AISC TECHNIQUES
2014年
5期
43-47
,共5页
王进臣%王健%刘威%刘跃华%赵丹
王進臣%王健%劉威%劉躍華%趙丹
왕진신%왕건%류위%류약화%조단
支撑辊%热轧油%润滑%辊耗
支撐輥%熱軋油%潤滑%輥耗
지탱곤%열알유%윤활%곤모
back-up roll%hot oil%lubrication%roll consumption
介绍了鞍钢2150生产线精轧机组工艺润滑系统的组成和调试情况，针对调试过程中出现的问题，对系统进行了改进。通过优化热轧油喷射时序，调整热轧油流量、水压，以及定期进行系统维护，提高了系统的运行稳定性，使轧辊表面状态和磨耗达到了预期目标，轧辊使用周期达到70 km 以上。
介紹瞭鞍鋼2150生產線精軋機組工藝潤滑繫統的組成和調試情況，針對調試過程中齣現的問題，對繫統進行瞭改進。通過優化熱軋油噴射時序，調整熱軋油流量、水壓，以及定期進行繫統維護，提高瞭繫統的運行穩定性，使軋輥錶麵狀態和磨耗達到瞭預期目標，軋輥使用週期達到70 km 以上。
개소료안강2150생산선정알궤조공예윤활계통적조성화조시정황，침대조시과정중출현적문제，대계통진행료개진。통과우화열알유분사시서，조정열알유류량、수압，이급정기진행계통유호，제고료계통적운행은정성，사알곤표면상태화마모체도료예기목표，알곤사용주기체도70 km 이상。
The components of the technological lubrication system and the situation of the system after commissioning applied onto the finishing mill train of the 2150 production line in An-gang are introduced. The system is further improved with regard to the troubles occurred during commissioning. The system operates more smoothly after taking such improvement measures as op-timizing the time sequence of hot oil spray, adjusting the flow rate and water pressure and keeping the system maintenance periodically, and as a result the surface condition and the abrasion of the rolls are in the desired state and the service cycle of the rolls can reach over 70 km.
