工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2014年
9期
42-45
,共4页
王若云%贺建芸%丁玉梅%刘肖英%杨卫民%焦志伟
王若雲%賀建蕓%丁玉梅%劉肖英%楊衛民%焦誌偉
왕약운%하건예%정옥매%류초영%양위민%초지위
蜂巢式塑料轮胎%聚氨酯%应力分布%传统橡胶轮胎
蜂巢式塑料輪胎%聚氨酯%應力分佈%傳統橡膠輪胎
봉소식소료륜태%취안지%응력분포%전통상효륜태
honeycomb plastic tire%polyurethane%stress distribution%traditional rubber tire
基于聚氨酯弹性体优异的性能,建立了3种不同密度的蜂巢式塑料轮胎模型,并以ABAQUS软件为工具,以同型号的传统橡胶轮胎为参照,对比分析了稳态滚动工况下轮胎的接地性能和应力分布。分析结果表明,与传统橡胶轮胎相比,蜂巢式塑料轮胎的等效应力分布更加均匀。因此,蜂巢式塑料轮胎局部发生过度磨损的可能性降低。此外,蜂巢式塑料轮胎支撑板的受力情况与蜂巢密度密切相关。
基于聚氨酯彈性體優異的性能,建立瞭3種不同密度的蜂巢式塑料輪胎模型,併以ABAQUS軟件為工具,以同型號的傳統橡膠輪胎為參照,對比分析瞭穩態滾動工況下輪胎的接地性能和應力分佈。分析結果錶明,與傳統橡膠輪胎相比,蜂巢式塑料輪胎的等效應力分佈更加均勻。因此,蜂巢式塑料輪胎跼部髮生過度磨損的可能性降低。此外,蜂巢式塑料輪胎支撐闆的受力情況與蜂巢密度密切相關。
기우취안지탄성체우이적성능,건립료3충불동밀도적봉소식소료륜태모형,병이ABAQUS연건위공구,이동형호적전통상효륜태위삼조,대비분석료은태곤동공황하륜태적접지성능화응력분포。분석결과표명,여전통상효륜태상비,봉소식소료륜태적등효응력분포경가균균。인차,봉소식소료륜태국부발생과도마손적가능성강저。차외,봉소식소료륜태지탱판적수력정황여봉소밀도밀절상관。
Based on superior performance of polyurethane elastomer,three different density of honeycomb plastic tires models were established,the same model of the traditional rubber tires were taken as reference,and ABAQUS software was used as analysis tool to compare and analyze the grounding performance and stress distribution of the plastic tires under the steady rolling conditions. The results show that the equivalent stresses of honeycomb plastic tires distribute more uniformly than that of the traditional rubber tires. Therefore, the possibility of excessive wear of honeycomb plastic tires gets smaller. In addition, the stress conditions of support plates of the tires are closely related to honeycomb density.