功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
19期
19061-19063,19069
,共4页
林金阳%张永爱%杨尊先%郭太良
林金暘%張永愛%楊尊先%郭太良
림금양%장영애%양존선%곽태량
平行栅%场发射%氧化锡薄膜%氧化铋薄膜
平行柵%場髮射%氧化錫薄膜%氧化鉍薄膜
평행책%장발사%양화석박막%양화필박막
Bi2 O3%field emission%chemical synthesis%organic solvent
采用脉冲电压法对平栅双层膜阴极进行处理,进一步提高其场致发射性能.采用磁控溅射法在平行栅电极上溅射氧化铋薄膜和氧化锡薄膜,并对薄膜进行 AFM 分析,通过场致发射测试结果表明,经过脉冲电压法处理后的平行栅双层膜阴极的发射性能,如亮度、均匀度等有了很大的提高,阳压为3000 V,栅压为190 V,其腔体亮度可达462 cd/m2.平行栅双层膜阴极的脉冲电压处理可以有效改善阴极的场发射性能,为改善 SED 阴极结构及材料提供了一条有效的实验方法.
採用脈遲電壓法對平柵雙層膜陰極進行處理,進一步提高其場緻髮射性能.採用磁控濺射法在平行柵電極上濺射氧化鉍薄膜和氧化錫薄膜,併對薄膜進行 AFM 分析,通過場緻髮射測試結果錶明,經過脈遲電壓法處理後的平行柵雙層膜陰極的髮射性能,如亮度、均勻度等有瞭很大的提高,暘壓為3000 V,柵壓為190 V,其腔體亮度可達462 cd/m2.平行柵雙層膜陰極的脈遲電壓處理可以有效改善陰極的場髮射性能,為改善 SED 陰極結構及材料提供瞭一條有效的實驗方法.
채용맥충전압법대평책쌍층막음겁진행처리,진일보제고기장치발사성능.채용자공천사법재평행책전겁상천사양화필박막화양화석박막,병대박막진행 AFM 분석,통과장치발사측시결과표명,경과맥충전압법처리후적평행책쌍층막음겁적발사성능,여량도、균균도등유료흔대적제고,양압위3000 V,책압위190 V,기강체량도가체462 cd/m2.평행책쌍층막음겁적맥충전압처리가이유효개선음겁적장발사성능,위개선 SED 음겁결구급재료제공료일조유효적실험방법.
In this paper,the field emission properties of the planar-gate triode with double-layer films cathode was improved by post-treatment of pulse voltage.The field emission device based on the planar-gate triode with B2 O 3/SnO 2 double-layer films based surface conducted emitter (SCE)has been successfully fabricated by mag-netron sputtering.The double-layer film’s surface morphology was characterized by atomic force microscopy, and its field emission (FE)properties were investigated.The experiment results show that the field emission properties,such as brightness,uniformity,was greatly improved by post-treatment of pulse voltage.The de-vice produced a brightness of 462 cd/m2 when the anode voltage was 3 000 V and the gate voltage was 1 90 V. The planar-gate triode with double-layer films cathode improved by post-treatment of pulse voltage was a feasi-ble method for improving field emission properties.The results provided an effective experimental method for improving SED structure and cathode.