电子器件
電子器件
전자기건
JOURNAL OF ELECTRON DEVICES
2014年
5期
882-887
,共6页
成像光学%结构光%偏振片%双频傅里叶变换
成像光學%結構光%偏振片%雙頻傅裏葉變換
성상광학%결구광%편진편%쌍빈부리협변환
imaging optics%structure light%polaroid%double-frequency fourier transform
为了完成对类镜面物体的面形测量,首先分析了光学三维面形测量对物体含有高亮区的反光崎岖表面无法完整测量的原因,然后从测量系统的照明方式出发,提出一种基于结构光的测量的方法。该结构光采用正弦光栅。在双频傅里叶变换轮廓术的基础上,通过起偏器和检偏器的作用,消除了高光表面反射对摄影系统的影响。该方法可以重建类镜面物体,测量精度较原来提高了3倍。理论分析和模拟结果均证明提出的测量方法的可行性和有效性。
為瞭完成對類鏡麵物體的麵形測量,首先分析瞭光學三維麵形測量對物體含有高亮區的反光崎嶇錶麵無法完整測量的原因,然後從測量繫統的照明方式齣髮,提齣一種基于結構光的測量的方法。該結構光採用正絃光柵。在雙頻傅裏葉變換輪廓術的基礎上,通過起偏器和檢偏器的作用,消除瞭高光錶麵反射對攝影繫統的影響。該方法可以重建類鏡麵物體,測量精度較原來提高瞭3倍。理論分析和模擬結果均證明提齣的測量方法的可行性和有效性。
위료완성대류경면물체적면형측량,수선분석료광학삼유면형측량대물체함유고량구적반광기구표면무법완정측량적원인,연후종측량계통적조명방식출발,제출일충기우결구광적측량적방법。해결구광채용정현광책。재쌍빈부리협변환륜곽술적기출상,통과기편기화검편기적작용,소제료고광표면반사대섭영계통적영향。해방법가이중건류경면물체,측량정도교원래제고료3배。이론분석화모의결과균증명제출적측량방법적가행성화유효성。
In order to complete the measurement of mirror object, the paper first analyzes the reason that the measurement of 3 D surface shape can't completely measure the object containing reflective rough surface of the highlighted area. Then,starting from the lighting pattern of measurement system,a method of measurement has been proposed based on structure light which uses double-frequency sinusoidal grating. Taking advantage of the polarizer's and analyzer's role respectively on the basis of it can eliminate the effect of highlights of the specular reflection on the camera system. The method can rebuild the mirror object and the measurement accuracy is raised three times. Theoretical analysis and experimental results prove the feasibility and effectiveness, of the proposed measurement method.