烟草科技
煙草科技
연초과기
TOBACCO SCIENCE & TECHNOLOGY
2014年
10期
5-8
,共4页
许峰%叶鸿宇%张建中%孟庆乃%姚光明%张大波%乔学义%孔臻
許峰%葉鴻宇%張建中%孟慶迺%姚光明%張大波%喬學義%孔臻
허봉%협홍우%장건중%맹경내%요광명%장대파%교학의%공진
叶丝加料%有效利用率%变异系数%正交试验%偏最小二乘法%回归模型
葉絲加料%有效利用率%變異繫數%正交試驗%偏最小二乘法%迴歸模型
협사가료%유효이용솔%변이계수%정교시험%편최소이승법%회귀모형
Cut strip casing%Effective utilization rate%Variation coefficient%Orthogonal experiment%Partial least square%Regression model
为完善叶丝加料工艺技术,探索叶丝加料效果的影响因素,采用正交试验,考察了物料流量、滚筒转速、加料助喷压力、热风温度等参数对叶丝加料效果的影响,采用偏最小二乘法建立了试验参数与加料效果的回归模型。结果表明物料流量、助喷压力对叶丝加料效果有显著影响,各参数对料液有效利用率的影响大小为:物料流量>助喷压力>滚筒转速>热风温度;对加料均匀性的影响大小为:助喷压力>物料流量>滚筒转速>热风温度。建立的回归模型对料液有效利用率和料液含量变异系数有较好的预测效果,偏差分别为0.7%,0.5%。
為完善葉絲加料工藝技術,探索葉絲加料效果的影響因素,採用正交試驗,攷察瞭物料流量、滾筒轉速、加料助噴壓力、熱風溫度等參數對葉絲加料效果的影響,採用偏最小二乘法建立瞭試驗參數與加料效果的迴歸模型。結果錶明物料流量、助噴壓力對葉絲加料效果有顯著影響,各參數對料液有效利用率的影響大小為:物料流量>助噴壓力>滾筒轉速>熱風溫度;對加料均勻性的影響大小為:助噴壓力>物料流量>滾筒轉速>熱風溫度。建立的迴歸模型對料液有效利用率和料液含量變異繫數有較好的預測效果,偏差分彆為0.7%,0.5%。
위완선협사가료공예기술,탐색협사가료효과적영향인소,채용정교시험,고찰료물료류량、곤통전속、가료조분압력、열풍온도등삼수대협사가료효과적영향,채용편최소이승법건립료시험삼수여가료효과적회귀모형。결과표명물료류량、조분압력대협사가료효과유현저영향,각삼수대료액유효이용솔적영향대소위:물료류량>조분압력>곤통전속>열풍온도;대가료균균성적영향대소위:조분압력>물료류량>곤통전속>열풍온도。건립적회귀모형대료액유효이용솔화료액함량변이계수유교호적예측효과,편차분별위0.7%,0.5%。
In order to improve the technology of cut strip casing, the factors influencing the casing effects of cut strips were examined by an orthogonal experiment in terms of tobacco throughput, cylinder rotating speed, nozzle pressure and hot air temperature, meantime, the regression models between the tested parameters and the casing effects were established by partial least square method. The results showed that tobacco throughput and nozzle pressure significantly influenced the casing effects, the tested parameters in the order of their influences on the effective utilization rate of casing were tobacco throughput > nozzle pressure > cylinder rotating speed >hot air temperature, while in the order of their influences on casing uniformity were nozzle pressure > tobacco throughput > cylinder rotating speed > hot air temperature. The established regression models had satisfactory prediction accuracy; the deviations between predictive and measured values of the effective utilization rate of casing and the variation coefficient of casing content in cut strips were 0.7% and 0.5%, respectively.