CAJ | 학술논문

利用扫描电镜、双臂电桥法分析了加工变形量和退火温度对Ag-Cu-Ce合金电阻率的影响。结果表明：Ag-Cu-Ce合金的电阻率随着加工变形量的增加而增大，Cu的加入使Ag-Ce合金电阻率稍有升高；当退火温度大于600℃时，Ag-Cu-Ce合金的电阻率急剧升高，电性能变差。
이용소묘전경、쌍비전교법분석료가공변형량화퇴화온도대Ag-Cu-Ce합금전조솔적영향。결과표명：Ag-Cu-Ce합금적전조솔수착가공변형량적증가이증대，Cu적가입사Ag-Ce합금전조솔초유승고；당퇴화온도대우600℃시，Ag-Cu-Ce합금적전조솔급극승고，전성능변차。
The effect of machining deformation and annealing temperature on the resistivity of Ag-Cu-Ce alloys was studied by scanning electron microscopic (SEM) and double bridge method. The results indicated that the resistivity of Ag-Cu-Ce alloys increased with increasing of machining deformation, the addition of Cu in Ag-Ce alloys increased its resistivity slightly, and the resistivity of Ag-Cu-Ce alloys improved sharply when the annealing temperature is higher than 600℃,then the electrical properties became worse.