CAJ | 학술논문

采用电化学方法测定水基切削液用缓蚀剂的缓蚀性能。以壬基酚聚氧乙烯醚磷酸酯缓蚀剂为例，测定6061铝合金在壬基酚聚氧乙烯醚磷酸酯溶液中的电化学交流阻抗和极化曲线，评价其缓蚀性能。结果表明，电化学方法测定结果与缓蚀剂常用的液相全浸腐蚀试验法的结果完全一致，证明采用电化学交流阻抗和极化曲线评定水基切削液中缓蚀剂的缓蚀性能是可行的。壬基酚聚氧乙烯醚磷酸酯是一种混合型缓蚀剂，可同时抑制阴极和阳极反应，在一定范围内，其添加量越大，缓蚀性能越好。
채용전화학방법측정수기절삭액용완식제적완식성능。이임기분취양을희미린산지완식제위례，측정6061려합금재임기분취양을희미린산지용액중적전화학교류조항화겁화곡선，평개기완식성능。결과표명，전화학방법측정결과여완식제상용적액상전침부식시험법적결과완전일치，증명채용전화학교류조항화겁화곡선평정수기절삭액중완식제적완식성능시가행적。임기분취양을희미린산지시일충혼합형완식제，가동시억제음겁화양겁반응，재일정범위내，기첨가량월대，완식성능월호。
The anticorrosion property of inhibitor used in water-based cutting fluid was studied by electrochemical meth-od.Taking nonylphenol polyoxyethylene ether phosphate ester as an example,the potential curve and AC impedance spec-troscopy of 606 1 aluminum alloy in the solution of nonylphenol polyoxyethylene ether phosphate ester were measured to as-sess the corrosion inhibition to water-based cutting fluid.The results of electrochemical method are the same as results of liquid immersion corrosive test method,so potential curve and AC impedance spectroscopy can be used to assess inhibitors of water-based cutting fluid.Nonylphenol polyoxyethylene ether phosphate ester is a mix-type inhibitor,which can inhibit cathodic and anodic process,and its anticorrosion property is improved with higher concentrations within a certain range.