化学工程
化學工程
화학공정
CHEMICAL ENGINEERING
2014年
9期
16-20,30
,共6页
离子液体%麻疯树籽油%生物柴油%正交试验优化
離子液體%痳瘋樹籽油%生物柴油%正交試驗優化
리자액체%마풍수자유%생물시유%정교시험우화
ionic liquid%jatropha curcas seed oil%biodiesel%orthogonal experiment optimization
离子液体作为绿色液体催化剂具有优良的性能而倍受关注,然而关于离子液体催化合成生物柴油的报道很少.文中以N-甲基咪唑、吡啶为原料,合成N-(4-磺酸基)苄基吡啶硫酸氢根盐离子液体,其结构经IR,1HNMR所证实;以该离子液体为催化剂,催化麻疯树籽油合成生物柴油.在单因子实验基础上,通过正交试验法对反应温度、催化剂的用量、反应时间和醇油摩尔比等影响合成生物柴油的因素进行了优化,同时也对离子液体的稳定性进行了检验.实验结果表明:在反应温度140℃、醇油摩尔比为15∶1、反应时间6h和催化剂用量为油质量的5%工艺条件下,生物柴油产率可达89.9%,且离子液体的稳定性好,可循环使用5次.此方法制备的生物柴油的主要质量指标与国内外生物柴油生产标准接近.
離子液體作為綠色液體催化劑具有優良的性能而倍受關註,然而關于離子液體催化閤成生物柴油的報道很少.文中以N-甲基咪唑、吡啶為原料,閤成N-(4-磺痠基)芐基吡啶硫痠氫根鹽離子液體,其結構經IR,1HNMR所證實;以該離子液體為催化劑,催化痳瘋樹籽油閤成生物柴油.在單因子實驗基礎上,通過正交試驗法對反應溫度、催化劑的用量、反應時間和醇油摩爾比等影響閤成生物柴油的因素進行瞭優化,同時也對離子液體的穩定性進行瞭檢驗.實驗結果錶明:在反應溫度140℃、醇油摩爾比為15∶1、反應時間6h和催化劑用量為油質量的5%工藝條件下,生物柴油產率可達89.9%,且離子液體的穩定性好,可循環使用5次.此方法製備的生物柴油的主要質量指標與國內外生物柴油生產標準接近.
리자액체작위록색액체최화제구유우량적성능이배수관주,연이관우리자액체최화합성생물시유적보도흔소.문중이N-갑기미서、필정위원료,합성N-(4-광산기)변기필정류산경근염리자액체,기결구경IR,1HNMR소증실;이해리자액체위최화제,최화마풍수자유합성생물시유.재단인자실험기출상,통과정교시험법대반응온도、최화제적용량、반응시간화순유마이비등영향합성생물시유적인소진행료우화,동시야대리자액체적은정성진행료검험.실험결과표명:재반응온도140℃、순유마이비위15∶1、반응시간6h화최화제용량위유질량적5%공예조건하,생물시유산솔가체89.9%,차리자액체적은정성호,가순배사용5차.차방법제비적생물시유적주요질량지표여국내외생물시유생산표준접근.