金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2014年
5期
42-46
,共5页
王双喜%刘高山%叶家星%张丹%胡梦夏
王雙喜%劉高山%葉傢星%張丹%鬍夢夏
왕쌍희%류고산%협가성%장단%호몽하
晶须%纤维%热导率%金刚石%陶瓷基板
晶鬚%纖維%熱導率%金剛石%陶瓷基闆
정수%섬유%열도솔%금강석%도자기판
whisker%fiber%thermal conductivity%diamond%ceramic substrate
晶须或纤维是材料补强增韧的有效原料,近年来一直是新材料研究的热点,目前,主要的品种包括碳纤维、SiC 晶须、钛酸铝晶须、氧化铝晶须等。传统的 Al2 O 3或 AlN 低温共烧复合基板,由于玻璃等烧结助剂的加入,陶瓷基板可以实现在900℃以下的温度烧结,但基板导热率也由于玻璃的加入而显著降低。研究表明:高导热的纤维在复合材料中相互搭接形成三维导热网络,可以显著增加复合材料的热导率。金刚石是世界上导热性能最好的材料,本研究探讨了采用一维金刚石作为导热高速网络材料制备金刚石-氧化铝陶瓷基板的可行性。
晶鬚或纖維是材料補彊增韌的有效原料,近年來一直是新材料研究的熱點,目前,主要的品種包括碳纖維、SiC 晶鬚、鈦痠鋁晶鬚、氧化鋁晶鬚等。傳統的 Al2 O 3或 AlN 低溫共燒複閤基闆,由于玻璃等燒結助劑的加入,陶瓷基闆可以實現在900℃以下的溫度燒結,但基闆導熱率也由于玻璃的加入而顯著降低。研究錶明:高導熱的纖維在複閤材料中相互搭接形成三維導熱網絡,可以顯著增加複閤材料的熱導率。金剛石是世界上導熱性能最好的材料,本研究探討瞭採用一維金剛石作為導熱高速網絡材料製備金剛石-氧化鋁陶瓷基闆的可行性。
정수혹섬유시재료보강증인적유효원료,근년래일직시신재료연구적열점,목전,주요적품충포괄탄섬유、SiC 정수、태산려정수、양화려정수등。전통적 Al2 O 3혹 AlN 저온공소복합기판,유우파리등소결조제적가입,도자기판가이실현재900℃이하적온도소결,단기판도열솔야유우파리적가입이현저강저。연구표명:고도열적섬유재복합재료중상호탑접형성삼유도열망락,가이현저증가복합재료적열도솔。금강석시세계상도열성능최호적재료,본연구탐토료채용일유금강석작위도열고속망락재료제비금강석-양화려도자기판적가행성。
Whisker or fiber is an efficacious kind of reinforcing material for composite.The research about whisker or fiber has been a hot focus in recent years.Nowadays,the main kinds of one-dimensional material include carbon fiber,SiC whisker,aluminium titanate whisker,alumina whisker, et al.The traditional LTCC substrates of Al2 O 3 or AlN with glass sintering additives could be sintered under 900 ℃,but at the same time the thermal conductivity of substrates reduces radically because of adding the glass additives.Experiment results showed that fiber with high thermal conductivity could lap together to form a three-dimensional heat conduction net which would increase thermal conductivity of composite greatly.Diamond is the best material for heat conduction.The feasibility of fabricating high heat conduction Al2 O 3 composite substrate with one-dimensional diamond network was discussed in this paper.