湖南师范大学自然科学学报
湖南師範大學自然科學學報
호남사범대학자연과학학보
ACTA SCIENTIARUM NATURALIUM UNIVERSITATIS NORMALIS HUNANENSIS
2014年
5期
58-64
,共7页
外压圆筒%自增强%弹塑性应力%强度理论
外壓圓筒%自增彊%彈塑性應力%彊度理論
외압원통%자증강%탄소성응력%강도이론
external pressure vessel%autofrettage%elastic-plastic stresses%load-bearing capacity
为了更加准确地确定超应变度,基于米赛斯( Mises)屈服准则,建立了外压圆筒应力方程。在此基础上,按卸载定理分别建立了受外压与受内压圆筒自增强方程,通过对当量应力求解,获得在弹性阶段与塑性阶段产生屈服的规律,并与按屈雷斯加( Tresca)屈服条件导出的方程进行了比较。研究表明,外压圆筒的弹性及塑性应力方程与受内压圆筒状态时方程不同,自增强处理后的残余应力大小也有差异,而且按米赛斯屈服准则的残余应力分量比按屈雷斯加屈服条件的残余应力分量大。但由于内外压圆筒的残余应力的当量应力形式是一样的,所以两个强度理论导出的结果在许多地方相同。
為瞭更加準確地確定超應變度,基于米賽斯( Mises)屈服準則,建立瞭外壓圓筒應力方程。在此基礎上,按卸載定理分彆建立瞭受外壓與受內壓圓筒自增彊方程,通過對噹量應力求解,穫得在彈性階段與塑性階段產生屈服的規律,併與按屈雷斯加( Tresca)屈服條件導齣的方程進行瞭比較。研究錶明,外壓圓筒的彈性及塑性應力方程與受內壓圓筒狀態時方程不同,自增彊處理後的殘餘應力大小也有差異,而且按米賽斯屈服準則的殘餘應力分量比按屈雷斯加屈服條件的殘餘應力分量大。但由于內外壓圓筒的殘餘應力的噹量應力形式是一樣的,所以兩箇彊度理論導齣的結果在許多地方相同。
위료경가준학지학정초응변도,기우미새사( Mises)굴복준칙,건립료외압원통응력방정。재차기출상,안사재정리분별건립료수외압여수내압원통자증강방정,통과대당량응력구해,획득재탄성계단여소성계단산생굴복적규률,병여안굴뢰사가( Tresca)굴복조건도출적방정진행료비교。연구표명,외압원통적탄성급소성응력방정여수내압원통상태시방정불동,자증강처리후적잔여응력대소야유차이,이차안미새사굴복준칙적잔여응력분량비안굴뢰사가굴복조건적잔여응력분량대。단유우내외압원통적잔여응력적당량응력형식시일양적,소이량개강도이론도출적결과재허다지방상동。
In order to accurately determine the value of super strain,the strain equation of pressure cylinders was established on the basis of Mises yield criterion.Based on this,the equation on autofrettage of external pressure cylinders and internal pressure cylinders was built by offloading theorem,the yield rule in the plastic stage and the elastic phase was obtained through solving equivalent stress, and comparison between the results based on Mises and Tresca yield criterion was made.Results show that the elastic and the plastic stresses of the external pressure cylinders are different from equation of the internal pressure cylinders and their residual stresses after removing au-tofrettage pressure also differ from each other.The components of the residual stresses based on Mises yield criteri-on are greater than those based on Tresca yield criterion.But the equivalent stress expression of residual stresses of the external pressure cylinders is the same as the internal pressure cylinders.Therefore, the derived results are identical with that according to Tresca yield criterion and Mises yield criterion in many places.