铁道标准设计
鐵道標準設計
철도표준설계
RAILWAY STANDARD DESIGN
2014年
11期
7-10
,共4页
哈大高速铁路%路基冻胀%自动观测
哈大高速鐵路%路基凍脹%自動觀測
합대고속철로%로기동창%자동관측
Harbin-Dalian high-speed railway%Frost heaving of subgrade%Automatic observation
哈大高速铁路通车后,路基冻胀变形控制是其一项重要任务,为查明路基冻胀机理,探索适用的冻胀处理措施,对路基冻胀进行自动观测和深化分析研究。采用自动观测系统,对路肩以下5 m 范围内路基的地温、水分、冻胀变形等进行观测,对观测结果进行统计分析和深化研究,研究结果表明:路基冻胀可分为5个阶段,冻深介于100~300 cm,基本上随着纬度的增大而增大;基床表层冻胀量占总冻胀量的40%~94%;融沉变形稳定后,存在4 mm 以内的残余变形;路堤与路堑的冻胀发展过程极为接近,但路堤的冻深一般大于路堑,路堤的冻胀量一般略大于路堑。
哈大高速鐵路通車後,路基凍脹變形控製是其一項重要任務,為查明路基凍脹機理,探索適用的凍脹處理措施,對路基凍脹進行自動觀測和深化分析研究。採用自動觀測繫統,對路肩以下5 m 範圍內路基的地溫、水分、凍脹變形等進行觀測,對觀測結果進行統計分析和深化研究,研究結果錶明:路基凍脹可分為5箇階段,凍深介于100~300 cm,基本上隨著緯度的增大而增大;基床錶層凍脹量佔總凍脹量的40%~94%;融沉變形穩定後,存在4 mm 以內的殘餘變形;路隄與路塹的凍脹髮展過程極為接近,但路隄的凍深一般大于路塹,路隄的凍脹量一般略大于路塹。
합대고속철로통차후,로기동창변형공제시기일항중요임무,위사명로기동창궤리,탐색괄용적동창처리조시,대로기동창진행자동관측화심화분석연구。채용자동관측계통,대로견이하5 m 범위내로기적지온、수분、동창변형등진행관측,대관측결과진행통계분석화심화연구,연구결과표명:로기동창가분위5개계단,동심개우100~300 cm,기본상수착위도적증대이증대;기상표층동창량점총동창량적40%~94%;융침변형은정후,존재4 mm 이내적잔여변형;로제여로참적동창발전과정겁위접근,단로제적동심일반대우로참,로제적동창량일반략대우로참。
After Harbin-Dalian high-speed railway was opened to traffic, the control of subgrade frost-heaving deformation becomes one of the important tasks. Automatic observation and intensive analysis on frost heaving of the subgrade are conducted to ascertain the frost-heaving mechanism and explore applicable treatment measures. Automatic observation system is adopted to observe the temperature, moisture and frost-heaving deformation of subgrade within 5 meters under the shoulder. This article statistically analyzes and studies in detail the observation data. The results show that: subgrade frost heaving can be divided into five stages; frost-heaving deformation increases along with the rising of latitude at the freezing depth between 100 ~ 300 cm; frost heaving of surface layer accounts for 40% to 94% of the total amount; the residual deformation is less than 4mm after thawing settlement deformation becomes stable; development processes of frost-heaving in embankment and cutting are very similar, but the deformation and frozen depth in embankment is generally greater than that in cutting.