CAJ | 학술논문

以自制的芳纶滤料基活性炭纤维(ACF)为载体，采用等体积浸渍法制备了一系列1.2% Mn-F e/ACF催化剂，并将其应用于低温 SCR 脱硝。采用BET、XRD、FESEM及EDS对催化剂的微观结构进行表征。活性实验结果表明，适量Fe元素的加入有利于提高催化剂的活性，其中1.2% Mn(0.75)-Fe/ACF催化剂在空速高达56000 h-1、温度为200℃的条件下的脱硝效率可达92%。BET、XRD 和 SEM结果显示高的比表面积和载体表面金属氧化物的均匀分布有利于提升催化剂的催化活性。
이자제적방륜려료기활성탄섬유(ACF)위재체，채용등체적침지법제비료일계렬1.2% Mn-F e/ACF최화제，병장기응용우저온 SCR 탈초。채용BET、XRD、FESEM급EDS대최화제적미관결구진행표정。활성실험결과표명，괄량Fe원소적가입유리우제고최화제적활성，기중1.2% Mn(0.75)-Fe/ACF최화제재공속고체56000 h-1、온도위200℃적조건하적탈초효솔가체92%。BET、XRD 화 SEM결과현시고적비표면적화재체표면금속양화물적균균분포유리우제승최화제적최화활성。
A series of 1 .2%Mn-Fe/ACF catalysts using MX rej ects-based activated carbon fibers as supports were prepared by an incipient wetness method and used for low-temperature selective catalytic reduction of NO. The catalysts were characterized by BET,XRD,FESEM and EDX techniques.The results of activity tests showed that the addition of an appropriate amount of iron could improve the catalytic activity of catalyst,and 1.2%Mn(0.75)-Fe/ACF catalyst yielded almost 92% NO conversion at 200 ℃ at a high space velocity of 56 000 h-1 .The results of BET,XRD and FESEM showed that a high surface area and well-dispersed metal oxides on the surface of support would improve the catalytic activity of catalyst.