机械工程与自动化
機械工程與自動化
궤계공정여자동화
MECHANICAL ENGINEERING & AUTOMATION
2014年
6期
10-12
,共3页
ADAMS/View%主起落架%落震仿真%减震器
ADAMS/View%主起落架%落震倣真%減震器
ADAMS/View%주기락가%락진방진%감진기
ADAMS/View%main landing gear%dropping experiment%absorber
起落架落震试验费用昂贵,所以使用仿真技术模拟落震试验的整个过程。应用CATIA建立某型磁流变主起落架几何模型,导入到ADAMS/View中,通过添加地面、约束和施加力,建立某型磁流变起落架落震仿真模型,并对某型磁流变减震器主起落架的落震试验数据进行分析和整理。比较仿真结果与试验结果表明,基于ADAMS建立的某型磁流变主起落架仿真模型可有效描述真实起落架,仿真过程可有效模拟落震试验过程。利用该方法节约了试验成本。
起落架落震試驗費用昂貴,所以使用倣真技術模擬落震試驗的整箇過程。應用CATIA建立某型磁流變主起落架幾何模型,導入到ADAMS/View中,通過添加地麵、約束和施加力,建立某型磁流變起落架落震倣真模型,併對某型磁流變減震器主起落架的落震試驗數據進行分析和整理。比較倣真結果與試驗結果錶明,基于ADAMS建立的某型磁流變主起落架倣真模型可有效描述真實起落架,倣真過程可有效模擬落震試驗過程。利用該方法節約瞭試驗成本。
기락가락진시험비용앙귀,소이사용방진기술모의락진시험적정개과정。응용CATIA건립모형자류변주기락가궤하모형,도입도ADAMS/View중,통과첨가지면、약속화시가력,건립모형자류변기락가락진방진모형,병대모형자류변감진기주기락가적락진시험수거진행분석화정리。비교방진결과여시험결과표명,기우ADAMS건립적모형자류변주기락가방진모형가유효묘술진실기락가,방진과정가유효모의락진시험과정。이용해방법절약료시험성본。
The costs of dropping tests of landing gears are likely to be high ,so the simulation tools were used to simulate the whole process of dropping test .A three dimensional model of a certain magnetorheological landing gear was established by CATIA .Then the model was imported into ADAMS/View ,the loads and constrains were imposed on the model ,and the dropping process was car-ried out by using this model .The simulation results and the experimental results of dropping tests were compared .The results prove that the application of ADAMS to the simulation of main magnetorheological landing gear is workable and the cost of dropping test is cut dow n .