工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2014年
10期
102-106
,共5页
徐伟鑫%乔辉%丁筠%郭亚龙
徐偉鑫%喬輝%丁筠%郭亞龍
서위흠%교휘%정균%곽아룡
聚酰胺%蓝色母粒%分散剂%分散性能%色彩性能
聚酰胺%藍色母粒%分散劑%分散性能%色綵性能
취선알%람색모립%분산제%분산성능%색채성능
polyamide%blue masterbatch%dispersant%dispersion performance%color performance
以低密度聚乙烯为载体树脂,酞菁蓝为颜料,聚乙烯蜡、乙烯丙烯酸共聚物(AC–540A)为分散剂,用双螺杆挤出造粒法制备颜料含量为20%的蓝色母粒。将制得的蓝色母粒用于聚酰胺(PA)6的着色。评价了不同分散剂种类及含量对PA6色彩性能和颜料分散性能的影响。结果表明,选用AC–540A为分散剂,其含量为3%时,PA6制品的–b*值最大(蓝色最明显),反射率最高,透射率最低,以偏光显微镜观察发现酞菁蓝颜料在PA6中分散均匀。
以低密度聚乙烯為載體樹脂,酞菁藍為顏料,聚乙烯蠟、乙烯丙烯痠共聚物(AC–540A)為分散劑,用雙螺桿擠齣造粒法製備顏料含量為20%的藍色母粒。將製得的藍色母粒用于聚酰胺(PA)6的著色。評價瞭不同分散劑種類及含量對PA6色綵性能和顏料分散性能的影響。結果錶明,選用AC–540A為分散劑,其含量為3%時,PA6製品的–b*值最大(藍色最明顯),反射率最高,透射率最低,以偏光顯微鏡觀察髮現酞菁藍顏料在PA6中分散均勻。
이저밀도취을희위재체수지,태정람위안료,취을희사、을희병희산공취물(AC–540A)위분산제,용쌍라간제출조립법제비안료함량위20%적람색모립。장제득적람색모립용우취선알(PA)6적착색。평개료불동분산제충류급함량대PA6색채성능화안료분산성능적영향。결과표명,선용AC–540A위분산제,기함량위3%시,PA6제품적–b*치최대(람색최명현),반사솔최고,투사솔최저,이편광현미경관찰발현태정람안료재PA6중분산균균。
By using PE–LD as carrier resin,phthalocyanine blue as the pigment,PE waxes and ethylene acrylic acid copolymer(AC–540A) as dispersants,the blue masterbatch whose pigment content was 20% was produced on a twin screw extruder. The blue masterbatch produced was then applied to tinting PA6. In this way,the effects of different types and contents of dispersants on color performance and dispersion performance were evaluated. The results show that when AC–540A is used as the dispersant with a content of 3%,the products have the highest–b*value,highest reflectivity and lowest transmittance. It is found that phthalocyanine blue pigment is dispersed uniformly in PA6 with the use of polarizing microscope.