工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2014年
10期
98-101
,共4页
陈波%赵平%程斌君%张发饶
陳波%趙平%程斌君%張髮饒
진파%조평%정빈군%장발요
高纯聚丙烯相容剂%低挥发性有机物%力学性能
高純聚丙烯相容劑%低揮髮性有機物%力學性能
고순취병희상용제%저휘발성유궤물%역학성능
high-purity PP compatilizers%low VOC%mechanical property
将自制高纯聚丙烯(PP)相容剂FH118和FH56应用于玻璃纤维(GF)增强PP，并与国外品牌相容剂进行了对比。结果表明，FH118和FH56的挥发性有机物含量分别仅为0.19%和0.21%；使用FH118和FH56作为相容剂时，PP／GF复合材料的拉伸强度、弯曲强度均有大幅度提高，并能够保持复合材料原有的弯曲弹性模量和缺口冲击强度不下降。在低相容剂添加量条件下(1%)，FH118和FH56能够表现出优异的效果。FH118和FH56能够替代国外高端相容剂产品。
將自製高純聚丙烯(PP)相容劑FH118和FH56應用于玻璃纖維(GF)增彊PP，併與國外品牌相容劑進行瞭對比。結果錶明，FH118和FH56的揮髮性有機物含量分彆僅為0.19%和0.21%；使用FH118和FH56作為相容劑時，PP／GF複閤材料的拉伸彊度、彎麯彊度均有大幅度提高，併能夠保持複閤材料原有的彎麯彈性模量和缺口遲擊彊度不下降。在低相容劑添加量條件下(1%)，FH118和FH56能夠錶現齣優異的效果。FH118和FH56能夠替代國外高耑相容劑產品。
장자제고순취병희(PP)상용제FH118화FH56응용우파리섬유(GF)증강PP，병여국외품패상용제진행료대비。결과표명，FH118화FH56적휘발성유궤물함량분별부위0.19%화0.21%；사용FH118화FH56작위상용제시，PP／GF복합재료적랍신강도、만곡강도균유대폭도제고，병능구보지복합재료원유적만곡탄성모량화결구충격강도불하강。재저상용제첨가량조건하(1%)，FH118화FH56능구표현출우이적효과。FH118화FH56능구체대국외고단상용제산품。
Self-made high-purity PP compatilizers FH118 and FH56 were added into glass fiber reinforced PP,and the effects were compared with those of foreign compatilizers. The results show that the volatile organic compounds contents in FH118 and FH56 are 0.19% and 0.21%,respectively. By using FH118 and FH56,the tensile strength,elongation at break and flexural strength of PP reinforced by glass fiber are increased significantly,while the original flexural modulus and notched impact strength are not influenced distinctly. Especially,at the condition of low compatilizer additive amount(1%),FH118 and FH56 show excellent effects.
