冶金丛刊
冶金叢刊
야금총간
METALLURGICAL COLLECTIONS
2014年
5期
4-5,8
,共3页
烧结机%跑偏%启车困难%机尾摆架%十字支撑
燒結機%跑偏%啟車睏難%機尾襬架%十字支撐
소결궤%포편%계차곤난%궤미파가%십자지탱
Sintering machine%Running deviation%Start difficulties%Tail swing frame%Cross support
针对唐钢不锈钢132 m2烧结机自2008年来跑偏严重，多次解决无果，同时存在冬季尤其是夜间冷态启车困难，电流高的现象，2013年利用定修，根据图纸，查找原因，最终基本确定了由于机尾摆架的十字支撑变形而造成以上两种现场象的原因。并根据实际情况，对十字支撑进行了修复，截至目前，以上两种现象均有较明显的改善。
針對唐鋼不鏽鋼132 m2燒結機自2008年來跑偏嚴重，多次解決無果，同時存在鼕季尤其是夜間冷態啟車睏難，電流高的現象，2013年利用定脩，根據圖紙，查找原因，最終基本確定瞭由于機尾襬架的十字支撐變形而造成以上兩種現場象的原因。併根據實際情況，對十字支撐進行瞭脩複，截至目前，以上兩種現象均有較明顯的改善。
침대당강불수강132 m2소결궤자2008년래포편엄중，다차해결무과，동시존재동계우기시야간랭태계차곤난，전류고적현상，2013년이용정수，근거도지，사조원인，최종기본학정료유우궤미파가적십자지탱변형이조성이상량충현장상적원인。병근거실제정황，대십자지탱진행료수복，절지목전，이상량충현상균유교명현적개선。
Aiming at the serious running deviation of 132 m2 sintering machine since 2008 in Tangshan Stainless Steel Co., Ltd., which can't be solved many times, and especially cold starting difficulties and high current phenomenon at night in winter , the reason for problems mentioned above was basically deter-mined through studying drawings and mechanical parts during maintenance period in 2013 .It is the de-formation of cross tail swing frame that caused the above two problems .And according to actual situation , the cross support was repaired .Up to now , the two problems mentioned above are obviously improved .
