原子能科学技术
原子能科學技術
원자능과학기술
ATOMIC ENERGY SCIENCE AND TECHNOLOGY
2014年
11期
2137-2141
,共5页
敖波%陈复兴%邓翠贞%曾亚斌
敖波%陳複興%鄧翠貞%曾亞斌
오파%진복흥%산취정%증아빈
微焦点CT%裂纹扩展%投影图像%裂纹扩展增量
微焦點CT%裂紋擴展%投影圖像%裂紋擴展增量
미초점CT%렬문확전%투영도상%렬문확전증량
microfocus computed tomography%crack propagation%projection image%increment of crack propagation
采用高频疲劳试验机进行了2A50锻铝缺口试样三点弯曲试验,对不同扩展阶段的表面裂纹进行了SEM对比分析。通过微焦点CT对裂纹进行了三维重建,三维可视化结果直观显示了裂纹的尺寸、位置和形态分布。通过相邻两个阶段二维CT图像的灰度、裂纹前沿位置分析裂纹扩展行为特征,结果表明,裂纹扩展不规则。分别将两个阶段的裂纹体进行投影得到了投影图像,对比后可观察到新的裂纹扩展区域,并得到了两个阶段的裂纹扩展前沿分布曲线。通过两个阶段的裂纹体三维分析得到了裂纹前沿扩展增量三维分布。
採用高頻疲勞試驗機進行瞭2A50鍛鋁缺口試樣三點彎麯試驗,對不同擴展階段的錶麵裂紋進行瞭SEM對比分析。通過微焦點CT對裂紋進行瞭三維重建,三維可視化結果直觀顯示瞭裂紋的呎吋、位置和形態分佈。通過相鄰兩箇階段二維CT圖像的灰度、裂紋前沿位置分析裂紋擴展行為特徵,結果錶明,裂紋擴展不規則。分彆將兩箇階段的裂紋體進行投影得到瞭投影圖像,對比後可觀察到新的裂紋擴展區域,併得到瞭兩箇階段的裂紋擴展前沿分佈麯線。通過兩箇階段的裂紋體三維分析得到瞭裂紋前沿擴展增量三維分佈。
채용고빈피로시험궤진행료2A50단려결구시양삼점만곡시험,대불동확전계단적표면렬문진행료SEM대비분석。통과미초점CT대렬문진행료삼유중건,삼유가시화결과직관현시료렬문적척촌、위치화형태분포。통과상린량개계단이유CT도상적회도、렬문전연위치분석렬문확전행위특정,결과표명,렬문확전불규칙。분별장량개계단적렬문체진행투영득도료투영도상,대비후가관찰도신적렬문확전구역,병득도료량개계단적렬문확전전연분포곡선。통과량개계단적렬문체삼유분석득도료렬문전연확전증량삼유분포。
The three‐point bending test of notched specimens of 2A50 forging aluminum was performed by high frequency fatigue tester ,and the surface cracks of different sta‐ges were analyzed and contrasted by SEM .The crack was reconstructed by microfocus computed tomography ,and its size ,position and distribution were visually displayed through 3D visualization . The crack propagation behaviors were researched through gray value and position of crack front of 2D CT images in two adjacent stages ,and the results show that crack propagation is irregular . The projection image of crack was obtained if crack of tw o stages projected onto the reference plane respectively ,a signifi‐cant increase of new crack propagation was observed compared with the previous projec‐tion of crack ,and the distribution curve of crack front of two stages was displayed .The 3D increment distribution of the crack front propagation was obtained through the 3D crack analysis of two stages .