光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2014年
11期
73-77
,共5页
刘昌儒%郑珂%王京海%曹冬雨
劉昌儒%鄭珂%王京海%曹鼕雨
류창유%정가%왕경해%조동우
激光%标定%平面靶标%仿射变换
激光%標定%平麵靶標%倣射變換
격광%표정%평면파표%방사변환
laser%calibration%planar target%affine transformation
本文提出了一种基于平面靶标的结构光系统参数快速标定方法。该方法基于摄影测量技术,使用编码点制作的平面靶标,由相机获取靶标平面光条图像,根据编码点的图像坐标以及靶标坐标,经过仿射变换和后方交会等处理,可以快速方便的得到光平面标定点的相机坐标,将标定点进行拟合即可完成标定。实验表明,该方法的光平面拟合中误差优于0.07 mm,系统测量精度的平均相对误差优于0.33%,具有较高的标定精度。同时该方法可以实现点、线、面等模式的结构光参数标定,通用性较强,标定效率较高,方法灵活,适合现场标定。
本文提齣瞭一種基于平麵靶標的結構光繫統參數快速標定方法。該方法基于攝影測量技術,使用編碼點製作的平麵靶標,由相機穫取靶標平麵光條圖像,根據編碼點的圖像坐標以及靶標坐標,經過倣射變換和後方交會等處理,可以快速方便的得到光平麵標定點的相機坐標,將標定點進行擬閤即可完成標定。實驗錶明,該方法的光平麵擬閤中誤差優于0.07 mm,繫統測量精度的平均相對誤差優于0.33%,具有較高的標定精度。同時該方法可以實現點、線、麵等模式的結構光參數標定,通用性較彊,標定效率較高,方法靈活,適閤現場標定。
본문제출료일충기우평면파표적결구광계통삼수쾌속표정방법。해방법기우섭영측량기술,사용편마점제작적평면파표,유상궤획취파표평면광조도상,근거편마점적도상좌표이급파표좌표,경과방사변환화후방교회등처리,가이쾌속방편적득도광평면표정점적상궤좌표,장표정점진행의합즉가완성표정。실험표명,해방법적광평면의합중오차우우0.07 mm,계통측량정도적평균상대오차우우0.33%,구유교고적표정정도。동시해방법가이실현점、선、면등모식적결구광삼수표정,통용성교강,표정효솔교고,방법령활,괄합현장표정。
A fast calibration method for structured-light parameters of 3D measurement system based on the planar target is proposed. This method, based on photogrammetry technology, using the code point making planar target, obtains the target plane light images from the camera. After the affine transformation and resection according to the codes point’s image coordinates and target coordinates, the camera coordinate of light plane calibration point can be got quickly and easily, then calibration completed after the plane fitting. Experiments results indicate that this method has high accuracy, the RMS of light plane fitting is better than 0.07 mm, and the average relative error is better than 0.33%. Furthermore, this method is also suitable for many other modes structured light with high generality and efficient, flexible and suitable for field calibration.