机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2014年
11期
112-114
,共3页
上官同英%张臻%陈志%明五一
上官同英%張臻%陳誌%明五一
상관동영%장진%진지%명오일
电火花线切割%电极丝%电磁力%多物理耦合%泊松方程
電火花線切割%電極絲%電磁力%多物理耦閤%泊鬆方程
전화화선절할%전겁사%전자력%다물리우합%박송방정
Wire-EDM%Wire Electrode%Electromagnetic Force%Multi-Physics Coupling%Poisson Equation
在电火花线切割加工过程中,电极丝沿着导轮上下运转,同时电极丝受到多种力的作用,例如放电爆炸力、电场力、电磁力、水流冲击力等,其中所受的电磁力对加工效果(效率和精度)有着重要的影响.因此,从机理上分析了加工不同工件时电极丝周围的磁通密度分布,采用多物理耦合建模方法,应用泊松方程,再根据电极丝的实际加工情况,建立二维稳态的电磁场模型,并分析电磁力对电极丝的作用.在不同的放电电流和放电间隙条件下,仿真得到磁场强度分布和电极丝所受电磁力.本研究可以为电火花线切割加工过程中的电极丝张力和拐角误差控制提供一定的理论依据.
在電火花線切割加工過程中,電極絲沿著導輪上下運轉,同時電極絲受到多種力的作用,例如放電爆炸力、電場力、電磁力、水流遲擊力等,其中所受的電磁力對加工效果(效率和精度)有著重要的影響.因此,從機理上分析瞭加工不同工件時電極絲週圍的磁通密度分佈,採用多物理耦閤建模方法,應用泊鬆方程,再根據電極絲的實際加工情況,建立二維穩態的電磁場模型,併分析電磁力對電極絲的作用.在不同的放電電流和放電間隙條件下,倣真得到磁場彊度分佈和電極絲所受電磁力.本研究可以為電火花線切割加工過程中的電極絲張力和枴角誤差控製提供一定的理論依據.
재전화화선절할가공과정중,전겁사연착도륜상하운전,동시전겁사수도다충력적작용,례여방전폭작력、전장력、전자력、수류충격력등,기중소수적전자력대가공효과(효솔화정도)유착중요적영향.인차,종궤리상분석료가공불동공건시전겁사주위적자통밀도분포,채용다물리우합건모방법,응용박송방정,재근거전겁사적실제가공정황,건립이유은태적전자장모형,병분석전자력대전겁사적작용.재불동적방전전류화방전간극조건하,방진득도자장강도분포화전겁사소수전자력.본연구가이위전화화선절할가공과정중적전겁사장력화괴각오차공제제공일정적이론의거.