湖北农业科学
湖北農業科學
호북농업과학
2014年
19期
4708-4711
,共4页
汤亮%叶方平%龚发云%曲远辉
湯亮%葉方平%龔髮雲%麯遠輝
탕량%협방평%공발운%곡원휘
播种机%真空吸嘴%流场分析%数值模拟
播種機%真空吸嘴%流場分析%數值模擬
파충궤%진공흡취%류장분석%수치모의
seeding-machine%vacuum nozzle%flow field analysis%numerical simulation
设计了一款自走式萝卜精量联合播种机,对吸嘴部分产生的速度流场分布情况进行研究,探讨其对吸种效果的影响.为考察不同真空压力条件下的吸种效果,以CFD软件为计算平台,采用结构化网格,以标准的k-ε湍流模型对吸嘴内部速度流场的分布进行了研究.结果表明,当真空压力分别为60、65、70、80 kPa时,得到这些真空度所对应的播种器吸嘴附距离分别为3.28、3.33、3.35、3.45 mm;最终确定吸嘴的吸附距离随着真空度的加大而增大.
設計瞭一款自走式蘿蔔精量聯閤播種機,對吸嘴部分產生的速度流場分佈情況進行研究,探討其對吸種效果的影響.為攷察不同真空壓力條件下的吸種效果,以CFD軟件為計算平檯,採用結構化網格,以標準的k-ε湍流模型對吸嘴內部速度流場的分佈進行瞭研究.結果錶明,噹真空壓力分彆為60、65、70、80 kPa時,得到這些真空度所對應的播種器吸嘴附距離分彆為3.28、3.33、3.35、3.45 mm;最終確定吸嘴的吸附距離隨著真空度的加大而增大.
설계료일관자주식라복정량연합파충궤,대흡취부분산생적속도류장분포정황진행연구,탐토기대흡충효과적영향.위고찰불동진공압력조건하적흡충효과,이CFD연건위계산평태,채용결구화망격,이표준적k-ε단류모형대흡취내부속도류장적분포진행료연구.결과표명,당진공압력분별위60、65、70、80 kPa시,득도저사진공도소대응적파충기흡취부거리분별위3.28、3.33、3.35、3.45 mm;최종학정흡취적흡부거리수착진공도적가대이증대.