河南科学
河南科學
하남과학
HENAN SCIENCE
2014年
10期
1987-1991
,共5页
赵迎秋%靳晓霞%吴威%吴博
趙迎鞦%靳曉霞%吳威%吳博
조영추%근효하%오위%오박
聚驱%破胶剂TS-506A%自由基%降解率
聚驅%破膠劑TS-506A%自由基%降解率
취구%파효제TS-506A%자유기%강해솔
polymer flooding%gel breaker TS-506A%free radical%degradation rate
聚合物驱增产效果显著,但随之而来的注聚堵塞问题也日益突出,聚合物堵塞会导致注聚井的注入压力显著上升,注液困难,严重影响了聚驱注入效果和油田的正常生产。为了解决聚合物堵塞问题,基于自由基氧化降解反应思路开发了破胶剂TS-506A,通过对TS-506A的多项性能评价试验及破胶物模试验表明,在模拟地层条件下,破胶剂TS-506A对聚合物的降解率达99%以上,对于注聚造成的伤害率达50%的岩芯,破胶后的岩芯渗透率恢复值达128%,破胶率达157%,破胶效果显著。
聚閤物驅增產效果顯著,但隨之而來的註聚堵塞問題也日益突齣,聚閤物堵塞會導緻註聚井的註入壓力顯著上升,註液睏難,嚴重影響瞭聚驅註入效果和油田的正常生產。為瞭解決聚閤物堵塞問題,基于自由基氧化降解反應思路開髮瞭破膠劑TS-506A,通過對TS-506A的多項性能評價試驗及破膠物模試驗錶明,在模擬地層條件下,破膠劑TS-506A對聚閤物的降解率達99%以上,對于註聚造成的傷害率達50%的巖芯,破膠後的巖芯滲透率恢複值達128%,破膠率達157%,破膠效果顯著。
취합물구증산효과현저,단수지이래적주취도새문제야일익돌출,취합물도새회도치주취정적주입압력현저상승,주액곤난,엄중영향료취구주입효과화유전적정상생산。위료해결취합물도새문제,기우자유기양화강해반응사로개발료파효제TS-506A,통과대TS-506A적다항성능평개시험급파효물모시험표명,재모의지층조건하,파효제TS-506A대취합물적강해솔체99%이상,대우주취조성적상해솔체50%적암심,파효후적암심삼투솔회복치체128%,파효솔체157%,파효효과현저。
Polymer flooding could increase the petroleum output dramatically,but the consequent blocking of the polymer injection become more and more prominent,which lead to high injection pressure,fluid affluxing difficulty. These problems would influence the effect of polymer flooding and the regular production of oilfields. In order to solve the polymer blocking,the gel breaker TS-506A has been developed which is based on the thought of free radical degradation reaction. The performance evaluation experiments of TS-506A indicate that the TS-506A gets good degradation rate over 99%. The physical model test demonstrates that the core penetration rate recovers to 100%and the gel breaking rate attains to 157%. The gel breaker TS-506A has remarkable polymer degradation effect.