传感技术学报
傳感技術學報
전감기술학보
Journal of Transduction Technology
2014年
10期
1305-1309
,共5页
圆柱壳体振动陀螺谐振子%振型测试%MEMS声传感器%高精度快速测量
圓柱殼體振動陀螺諧振子%振型測試%MEMS聲傳感器%高精度快速測量
원주각체진동타라해진자%진형측시%MEMS성전감기%고정도쾌속측량
resonator of shell vibrating gyroscope%vibration type test%MEMS voice sensor%fast testing with high presision
振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。
振動陀螺諧振子振型一般採用激光進行非接觸式測量,這種方法存在設備成本高、操作複雜、效率低等問題,因此,提齣瞭一種基于MEMS聲傳感器的圓柱殼體振動陀螺諧振子振型測試方法。該方法利用體積小,指嚮性高的MEMS聲傳感器對諧振子振動聲場進行高分辨率測量,穫得精確的諧振子振動分佈情況,建立瞭諧振子聲波測試實驗繫統,進行瞭測試實驗,併與激光測振儀的測量結果進行比對。實驗結果錶明,該測試繫統具有較高的振型測量精度。這種測試方法成本低,操作簡便,測量精度高,可以實現諧振子振型的高精度快速測量,為後續的諧振子脩形及陀螺控製提供重要基礎。
진동타라해진자진형일반채용격광진행비접촉식측량,저충방법존재설비성본고、조작복잡、효솔저등문제,인차,제출료일충기우MEMS성전감기적원주각체진동타라해진자진형측시방법。해방법이용체적소,지향성고적MEMS성전감기대해진자진동성장진행고분변솔측량,획득정학적해진자진동분포정황,건립료해진자성파측시실험계통,진행료측시실험,병여격광측진의적측량결과진행비대。실험결과표명,해측시계통구유교고적진형측량정도。저충측시방법성본저,조작간편,측량정도고,가이실현해진자진형적고정도쾌속측량,위후속적해진자수형급타라공제제공중요기출。
The untouched vibration type testing of vibrating gyroscope is usually based on the using of laser vibrome ̄ter,but this method has some problems such as high cost,complex operate,low testing rate etc. A testing method put forward based on MEMS voice sensor which is in micro size with high directivity in voice sensing,and a testing sys ̄tem of vibration type is also built. By comparison with the result tested by laser vibrometer,it is proved that the tes ̄ting system built with MEMS voice sensor has high precision in vibration type testing with the advantages of low cost and easy operation. It can be used in vibration fast testing and can provide results with high precision which can of ̄fer important base for resonator patching and gyroscope control.