焊管
銲管
한관
WELDED PIPE AND TUBE
2014年
10期
30-33,37
,共5页
张海波%彭立山%白雷杰%赵志伟%刘旭%巩忠旺
張海波%彭立山%白雷傑%趙誌偉%劉旭%鞏忠旺
장해파%팽립산%백뢰걸%조지위%류욱%공충왕
X70钢级%大径厚比%热煨弯管
X70鋼級%大徑厚比%熱煨彎管
X70강급%대경후비%열외만관
X70 steel grade%large diameter-thickness ratio%hot bending bends
针对X70钢级大径厚比热煨弯管的制造难点,合理改进了弯管机组设备,优化弯管成型工艺参数,精确测量和控制弯管煨制温度和速度,开发了一套完整的大径厚比弯管制造工艺,该工艺解决了大径厚比弯管成型后管体椭圆度超标和弯管综合力学性能差等问题。采用该工艺进行了单根和批量生产,产品符合伊拉克MOEP工程《弯管技术规格书》要求。
針對X70鋼級大徑厚比熱煨彎管的製造難點,閤理改進瞭彎管機組設備,優化彎管成型工藝參數,精確測量和控製彎管煨製溫度和速度,開髮瞭一套完整的大徑厚比彎管製造工藝,該工藝解決瞭大徑厚比彎管成型後管體橢圓度超標和彎管綜閤力學性能差等問題。採用該工藝進行瞭單根和批量生產,產品符閤伊拉剋MOEP工程《彎管技術規格書》要求。
침대X70강급대경후비열외만관적제조난점,합리개진료만관궤조설비,우화만관성형공예삼수,정학측량화공제만관외제온도화속도,개발료일투완정적대경후비만관제조공예,해공예해결료대경후비만관성형후관체타원도초표화만관종합역학성능차등문제。채용해공예진행료단근화비량생산,산품부합이랍극MOEP공정《만관기술규격서》요구。
In this article,according to the manufacturing difficulties of X70 grade hot bending bends with large diameter-thickness ratio,it reasonably improved bends unit equipment,optimized bends forming process parameters,accurately measured and controlled the temperature and speed in bends forming process. A complete set of large diameter-thickness ratio bends manufacturing process was developed, it resolved some problems,including ovality of bends body exceeding the standard requirements,the comprehensive mechanic properties not good,and other manufacturing difficulties. It adopted the above manufacturing process to conduct single and bulk production, the products accord with the requirements of Iraq MOEP Project Technical Specification for Bending Bends.