机电一体化
機電一體化
궤전일체화
MECHATRONICS
2014年
9期
65-69
,共5页
电磁焊接%平板焊接%电磁线圈%仿真
電磁銲接%平闆銲接%電磁線圈%倣真
전자한접%평판한접%전자선권%방진
electromagnetic welding%flat welding%electromagnetic coil%simulation
针对平板电磁焊接难以形成良好的焊接接头的技术难题,通过试验发现普通线圈电路的缺陷,设计了能增大线圈电容储存量且不熔断电路的方案.采用电磁仿真软件进行仿真试验,得到焊接板涡流密度云图及所受洛伦兹力曲线.证明改进后电路有助于形成良好的焊接接头且安全性能良好.
針對平闆電磁銲接難以形成良好的銲接接頭的技術難題,通過試驗髮現普通線圈電路的缺陷,設計瞭能增大線圈電容儲存量且不鎔斷電路的方案.採用電磁倣真軟件進行倣真試驗,得到銲接闆渦流密度雲圖及所受洛倫玆力麯線.證明改進後電路有助于形成良好的銲接接頭且安全性能良好.
침대평판전자한접난이형성량호적한접접두적기술난제,통과시험발현보통선권전로적결함,설계료능증대선권전용저존량차불용단전로적방안.채용전자방진연건진행방진시험,득도한접판와류밀도운도급소수락륜자력곡선.증명개진후전로유조우형성량호적한접접두차안전성능량호.