船舶力学
船舶力學
선박역학
JOURNAL OF SHIP MECHANICS
2014年
11期
1361-1366
,共6页
朱璇%刘超%祁恩荣%王德禹
硃璇%劉超%祁恩榮%王德禹
주선%류초%기은영%왕덕우
超大型浮体%柔性连接器设计%非线性%有限元
超大型浮體%柔性連接器設計%非線性%有限元
초대형부체%유성련접기설계%비선성%유한원
Very Large Floating Base%design of flexible connector%nonlinearity%finite element method
超大型海上浮式基地(VLFB)连接器的设计是 VLFB 设计过程中非常关键的环节。文章采用 Sesam/GeniE建立 VLFB 模块水动力模型,计算出不同刚度连接器在4个海况下的最大载荷值,选取了合适的连接器刚度,并计算出此刚度下的连接器在5个海况下不同浪向角的连接器载荷,选取7级海况45°浪向角的载荷作为设计载荷值,提出了一种柔性连接器的设计方案,并用 Abaqus 建模进行非线性分析,结果表明方案符合设计要求,为VLFB 连接器的设计提供了参考。
超大型海上浮式基地(VLFB)連接器的設計是 VLFB 設計過程中非常關鍵的環節。文章採用 Sesam/GeniE建立 VLFB 模塊水動力模型,計算齣不同剛度連接器在4箇海況下的最大載荷值,選取瞭閤適的連接器剛度,併計算齣此剛度下的連接器在5箇海況下不同浪嚮角的連接器載荷,選取7級海況45°浪嚮角的載荷作為設計載荷值,提齣瞭一種柔性連接器的設計方案,併用 Abaqus 建模進行非線性分析,結果錶明方案符閤設計要求,為VLFB 連接器的設計提供瞭參攷。
초대형해상부식기지(VLFB)련접기적설계시 VLFB 설계과정중비상관건적배절。문장채용 Sesam/GeniE건립 VLFB 모괴수동력모형,계산출불동강도련접기재4개해황하적최대재하치,선취료합괄적련접기강도,병계산출차강도하적련접기재5개해황하불동랑향각적련접기재하,선취7급해황45°랑향각적재하작위설계재하치,제출료일충유성련접기적설계방안,병용 Abaqus 건모진행비선성분석,결과표명방안부합설계요구,위VLFB 련접기적설계제공료삼고。
The design of Very Large Floating Base connector is a critical part in VLFB design process. In this paper, VLFB module hydrodynamic model is established by Sesam / GeniE. The maximum load values of VLFB connectors of different stiffness in four different sea conditions were calculated. The appropriate connector stiffness was selected and the loads of the connector in five sea conditions, in different wave di-rection angle were calculated. The specific load in 7 level sea condition and in 45°wave angle was chosen as the design load for VLFB connector. A design of flexible connector was presented and a 3D model of the con-nector was created, the model was nonlinearly analyzed by Abaqus finite element method. The result shows that the design meets the design requirements, which provides a reference for VLFB connector design.