辽宁科技大学学报
遼寧科技大學學報
료녕과기대학학보
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY LIAONING
2014年
5期
489-492,498
,共5页
陈泓业%李胜利%唐广波%靳玉俊
陳泓業%李勝利%唐廣波%靳玉俊
진홍업%리성리%당엄파%근옥준
正交试验%镀层%耐蚀性
正交試驗%鍍層%耐蝕性
정교시험%도층%내식성
orthogonal test%coating%corrosion resistance
为获得外观光洁,镀层均匀且致密的不锈钢1Cr18Ni9Ti,本文通过正交试验在充分考虑镀液稳定性、镀速、镀层质量等因素后,择优筛选出1Cr18Ni9Ti镀液配方及施镀条件:硫酸镍(25 g/L),次亚磷酸钠(35 g/L),乙酸钠(20 g/L),柠檬酸(5 g/L),乳酸(10 g/L),硫脲(1 mg/L);温度为88℃,pH值4.8。经检测,镀液稳定性好;镀层外观光亮,厚度均匀、致密;施镀后试样耐蚀性明显优于不锈钢1Cr18Ni9Ti的耐蚀性。
為穫得外觀光潔,鍍層均勻且緻密的不鏽鋼1Cr18Ni9Ti,本文通過正交試驗在充分攷慮鍍液穩定性、鍍速、鍍層質量等因素後,擇優篩選齣1Cr18Ni9Ti鍍液配方及施鍍條件:硫痠鎳(25 g/L),次亞燐痠鈉(35 g/L),乙痠鈉(20 g/L),檸檬痠(5 g/L),乳痠(10 g/L),硫脲(1 mg/L);溫度為88℃,pH值4.8。經檢測,鍍液穩定性好;鍍層外觀光亮,厚度均勻、緻密;施鍍後試樣耐蝕性明顯優于不鏽鋼1Cr18Ni9Ti的耐蝕性。
위획득외관광길,도층균균차치밀적불수강1Cr18Ni9Ti,본문통과정교시험재충분고필도액은정성、도속、도층질량등인소후,택우사선출1Cr18Ni9Ti도액배방급시도조건:류산얼(25 g/L),차아린산납(35 g/L),을산납(20 g/L),저몽산(5 g/L),유산(10 g/L),류뇨(1 mg/L);온도위88℃,pH치4.8。경검측,도액은정성호;도층외관광량,후도균균、치밀;시도후시양내식성명현우우불수강1Cr18Ni9Ti적내식성。
In order to find out the best plating bath formulation and plating conditions for stainless steel 1Cr18Ni9Ti.By fully considering the stability of the plating solution,plating speed,quality of the coating and other factors,the optimal bath formulation and agreeble plating conditions are determined through the orthogo-nal test:nickel sulfate(25 g/L),sodium phosphite(35 g/L),sodium acetate(20 g/L),citric acid(5 g/L)and lactic acid(10 g/L)and thiourea(1 mg/L),the temperature is 88℃,and pH is 4.8.The plating bath solution has good stability,the coating has a bright,uniform thickness and density appearance,the corrosion resistance of the sample is better than stainless steel 1Cr18Ni9Ti after treatment.