润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2014年
11期
118-120
,共3页
真空干燥器%机械密封%泄漏
真空榦燥器%機械密封%洩漏
진공간조기%궤계밀봉%설루
vacuum dryer%mechanical seal%leakage
对真空耙式干燥工艺及设备特点进行分析,以轴径为320 mm的某型号真空耙式干燥器为例,设计其密封结构,探讨其冲洗方案及摩擦副、辅助密封和结构件的选材。模拟实际工况对设计的样机进行的运转试验,结果表明该密封结构密封效果良好。
對真空耙式榦燥工藝及設備特點進行分析,以軸徑為320 mm的某型號真空耙式榦燥器為例,設計其密封結構,探討其遲洗方案及摩抆副、輔助密封和結構件的選材。模擬實際工況對設計的樣機進行的運轉試驗,結果錶明該密封結構密封效果良好。
대진공파식간조공예급설비특점진행분석,이축경위320 mm적모형호진공파식간조기위례,설계기밀봉결구,탐토기충세방안급마찰부、보조밀봉화결구건적선재。모의실제공황대설계적양궤진행적운전시험,결과표명해밀봉결구밀봉효과량호。
The characteristics of drying process and equipment of some model vacuum rake dryer were analyzed. By tak-ing a vacuum rake dryer with shaft diameter of 320 mm as an example,the seal structure was designed,the cleaning meth-od,material selection of friction pairs,assistant seal and structural parts were explored. Trial runs were conducted on the designed sample machine by simulating practical working condition. The result shows that the structural seal has good seal-ing effect.