机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2014年
21期
13-15
,共3页
空间开链机构%仿真%模糊匹配%轨迹综合
空間開鏈機構%倣真%模糊匹配%軌跡綜閤
공간개련궤구%방진%모호필배%궤적종합
Space open chain mechanism%Simulation%Fuzzy match%Path synthesis
在对关节型二自由度开链空间机构的末端轨迹分析过程中发现R-R开链空间机构是多输入单输出,其轨迹是一个复杂的空间闭合立体图形,很难直接进行轨迹的识别与综合等难题。针对以上的问题提出了利用Simmechanics仿真计算的方法得到其末端轨迹的点和轨迹图,通过形态学理论提取仿真模拟轨迹图像的特征参数,构建轨迹的电子图谱库。在设计R-R开链机构时应用模糊论将该机构的期望轨迹与已有轨迹进行匹配,从而反求出该空间开链机构的机构参数。最后给出应用实例验证该方法的可行性与优越性。
在對關節型二自由度開鏈空間機構的末耑軌跡分析過程中髮現R-R開鏈空間機構是多輸入單輸齣,其軌跡是一箇複雜的空間閉閤立體圖形,很難直接進行軌跡的識彆與綜閤等難題。針對以上的問題提齣瞭利用Simmechanics倣真計算的方法得到其末耑軌跡的點和軌跡圖,通過形態學理論提取倣真模擬軌跡圖像的特徵參數,構建軌跡的電子圖譜庫。在設計R-R開鏈機構時應用模糊論將該機構的期望軌跡與已有軌跡進行匹配,從而反求齣該空間開鏈機構的機構參數。最後給齣應用實例驗證該方法的可行性與優越性。
재대관절형이자유도개련공간궤구적말단궤적분석과정중발현R-R개련공간궤구시다수입단수출,기궤적시일개복잡적공간폐합입체도형,흔난직접진행궤적적식별여종합등난제。침대이상적문제제출료이용Simmechanics방진계산적방법득도기말단궤적적점화궤적도,통과형태학이론제취방진모의궤적도상적특정삼수,구건궤적적전자도보고。재설계R-R개련궤구시응용모호론장해궤구적기망궤적여이유궤적진행필배,종이반구출해공간개련궤구적궤구삼수。최후급출응용실례험증해방법적가행성여우월성。
In analyzing the end point path of 2 DOF articulated space open chain mechanism,it is found that the path synthesis and recognition were very difficulty,because the path of the R-R mechanism was a close complex 3D figure and the mechanism had a characteristic of multi-input and single-output. Aiming at these problems,a new method was proposed which was simulation with calcu-lation of using the Simmechanics to obtain path figure and record the end point trajectory. On the basis of these abstracted simulation of characteristic parameters of path figure,a path electronic database was created through the morphology theory. In design of the R-R mechanism,Fuzzy theory was used to match a desired patch with the trajectory existed of the mechanism,thereby,the parameters of space mechanism were reversely solved. In the end,an example is given to prove the feasibility and advantage of this method.