机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2014年
21期
172-177
,共6页
树脂矿物复合材料%加工中心床身%静动态特性%有限元分析%ABAQUS
樹脂礦物複閤材料%加工中心床身%靜動態特性%有限元分析%ABAQUS
수지광물복합재료%가공중심상신%정동태특성%유한원분석%ABAQUS
Resin mineral composite material%Processing center machine bed%Static and dynamic analysis%FEA%ABAQUS
以某加工中心床身为研究对象,分别对由树脂矿物复合材料和铸铁材料制造的加工中心床身进行静动态特性分析。利用ABAQUS软件对两种床身在承受相同载荷条件下的变形进行了分析,研究了两种床身的固有频率和固有振型,并分析比较了是否考虑阻尼特性时两种床身的谐响应分析结果。结果显示:两种材料床身在静刚度接近的情况下,使用树脂矿物复合材料制作加工中心床身能有效提高床身的固有频率,并明显降低床身在受到外界激励时的动态响应。分析结果证明:采用树脂矿物复合材料制作的加工中心床身具有更好的动态特性,用树脂矿物复合材料作为机床床身有其独特的优点。
以某加工中心床身為研究對象,分彆對由樹脂礦物複閤材料和鑄鐵材料製造的加工中心床身進行靜動態特性分析。利用ABAQUS軟件對兩種床身在承受相同載荷條件下的變形進行瞭分析,研究瞭兩種床身的固有頻率和固有振型,併分析比較瞭是否攷慮阻尼特性時兩種床身的諧響應分析結果。結果顯示:兩種材料床身在靜剛度接近的情況下,使用樹脂礦物複閤材料製作加工中心床身能有效提高床身的固有頻率,併明顯降低床身在受到外界激勵時的動態響應。分析結果證明:採用樹脂礦物複閤材料製作的加工中心床身具有更好的動態特性,用樹脂礦物複閤材料作為機床床身有其獨特的優點。
이모가공중심상신위연구대상,분별대유수지광물복합재료화주철재료제조적가공중심상신진행정동태특성분석。이용ABAQUS연건대량충상신재승수상동재하조건하적변형진행료분석,연구료량충상신적고유빈솔화고유진형,병분석비교료시부고필조니특성시량충상신적해향응분석결과。결과현시:량충재료상신재정강도접근적정황하,사용수지광물복합재료제작가공중심상신능유효제고상신적고유빈솔,병명현강저상신재수도외계격려시적동태향응。분석결과증명:채용수지광물복합재료제작적가공중심상신구유경호적동태특성,용수지광물복합재료작위궤상상신유기독특적우점。
By the study object of one processing center machine bed,the static and dynamic characteristic analysis was conduc-ted on the processing center machine bed made of resin composite mineral material and cast iron respectively. The deformation of the two kinds of machine beds under the same static and dynamic load was analyzed by means of ABAQUS. The natural frequencies and natural modes of the both machine beds were studied,and the harmonic response analysis results were analyzed and compared consider-ing whether the damping characteristic was taken into consideration or not. The results show that under condition of having about the same static rigidities of machine beds with two kinds of material,the processing center machine bed made of resin mineral composite material can effectively increase the natural frequencies,and reduce the dynamic response of the machine bed when suffered external incentive. The analysis results certify that the processing center machine bed made of resin mineral composite material has higher dy-namic characteristic,and using the resin mineral composite material as machine bed has its unique advantage.