功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2012年
9期
1126-1129
,共4页
宁青菊%王邦卿%郭芳芳%乔畅君%王秀峰
寧青菊%王邦卿%郭芳芳%喬暢君%王秀峰
저청국%왕방경%곽방방%교창군%왕수봉
白光LED%Ca2SiO3Cl2%Dy3+掺杂%发光
白光LED%Ca2SiO3Cl2%Dy3+摻雜%髮光
백광LED%Ca2SiO3Cl2%Dy3+참잡%발광
white light emitting diode%Ca2SiO3Cl2 : Dy^3+ doped%luminescence
采用溶胶-凝胶法合成了发射白光的Ca2SiO3Cl2∶Dy3+荧光粉。利用XRD分析了荧光粉的晶体结构,其为四方晶系。在350nm近紫外光激发下,荧光粉呈白光发射,有两个主发射峰位分别于482和573nm,分别对应于Dy3+的4F9/2→6H15/2和4F9/2→6H13/2跃迁;监测573nm最强发射峰,激发光谱覆盖200~450nm,主激发峰位于350nm。研究结果表明保温时间的延长有利于发射强度的提高,伴随着Dy3+浓度的增大,发射光谱图中的两个主发射峰先增强后减弱,Dy3+的最佳浓度为2%(摩尔分数)。
採用溶膠-凝膠法閤成瞭髮射白光的Ca2SiO3Cl2∶Dy3+熒光粉。利用XRD分析瞭熒光粉的晶體結構,其為四方晶繫。在350nm近紫外光激髮下,熒光粉呈白光髮射,有兩箇主髮射峰位分彆于482和573nm,分彆對應于Dy3+的4F9/2→6H15/2和4F9/2→6H13/2躍遷;鑑測573nm最彊髮射峰,激髮光譜覆蓋200~450nm,主激髮峰位于350nm。研究結果錶明保溫時間的延長有利于髮射彊度的提高,伴隨著Dy3+濃度的增大,髮射光譜圖中的兩箇主髮射峰先增彊後減弱,Dy3+的最佳濃度為2%(摩爾分數)。
채용용효-응효법합성료발사백광적Ca2SiO3Cl2∶Dy3+형광분。이용XRD분석료형광분적정체결구,기위사방정계。재350nm근자외광격발하,형광분정백광발사,유량개주발사봉위분별우482화573nm,분별대응우Dy3+적4F9/2→6H15/2화4F9/2→6H13/2약천;감측573nm최강발사봉,격발광보복개200~450nm,주격발봉위우350nm。연구결과표명보온시간적연장유리우발사강도적제고,반수착Dy3+농도적증대,발사광보도중적량개주발사봉선증강후감약,Dy3+적최가농도위2%(마이분수)。
Ca2SiO3Cl2 : Dy^3+ white light phosphors was synthesized by sol-gel method. The phase of the samples was characterized by powder X-ray diffract ion (XRD), it has tetragonal system. The phosphor shows two major emission peaks locating at 482 and 573nm by the near ultraviolet excitation peak of 350nm, which correspond to the 4F9/2→6H15/2 and 4F9/2→6H13/2 characteristics transport of Dy^3+ , monitoring the strong emission peak at 573nm, the excitation band was covered from 300 to 470nm and the main peak of was located at 350 nm. The emission intensities increase with extending of the holding time. The experiment results suggested that the strongest emission was obtained when the concentration of the Dy^3+ inns was 2mol %.