功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2012年
22期
3097-3100,3105
,共5页
花银群%崔晓%刘海霞%黄新友
花銀群%崔曉%劉海霞%黃新友
화은군%최효%류해하%황신우
固相法%BMN陶瓷%离子替换%介电常数%介电损耗
固相法%BMN陶瓷%離子替換%介電常數%介電損耗
고상법%BMN도자%리자체환%개전상수%개전손모
solid state method%BMN ceramic%ion replacement%dielectric constant%dielectric loss
采用固相法制备BiLiMg(NbxMx)O系BMN基陶瓷样品。分别研究了Zr4+离子、Sn4+离子和Ti4+离子替代Nb5+离子对BMN陶瓷性能的影响。结果表明,Zr4+离子、Sn4+离子和Ti4+离子替代量较小时,相结构为单一焦绿石结构。随着Zr4+离子、Sn4+离子替代量的增加,样品中空隙增多;Ti4+离子替代量将直接影响样品中晶粒的生长方向,对样品中空隙影响不明显。介电性能方面,不同替换离子介电性能最佳状态出现在不同替换量的情况下(m为比例系数):在Zr4+离子替换量为2m时,介电常数为177.4177,介电损耗为0.00034;Sn4+离子替代量为1m时,介电常数为174.9671,介电损耗为0.00038;Ti4+离子替代量为4m时,介电常数为188.4959,介电损耗为0.00027。
採用固相法製備BiLiMg(NbxMx)O繫BMN基陶瓷樣品。分彆研究瞭Zr4+離子、Sn4+離子和Ti4+離子替代Nb5+離子對BMN陶瓷性能的影響。結果錶明,Zr4+離子、Sn4+離子和Ti4+離子替代量較小時,相結構為單一焦綠石結構。隨著Zr4+離子、Sn4+離子替代量的增加,樣品中空隙增多;Ti4+離子替代量將直接影響樣品中晶粒的生長方嚮,對樣品中空隙影響不明顯。介電性能方麵,不同替換離子介電性能最佳狀態齣現在不同替換量的情況下(m為比例繫數):在Zr4+離子替換量為2m時,介電常數為177.4177,介電損耗為0.00034;Sn4+離子替代量為1m時,介電常數為174.9671,介電損耗為0.00038;Ti4+離子替代量為4m時,介電常數為188.4959,介電損耗為0.00027。
채용고상법제비BiLiMg(NbxMx)O계BMN기도자양품。분별연구료Zr4+리자、Sn4+리자화Ti4+리자체대Nb5+리자대BMN도자성능적영향。결과표명,Zr4+리자、Sn4+리자화Ti4+리자체대량교소시,상결구위단일초록석결구。수착Zr4+리자、Sn4+리자체대량적증가,양품중공극증다;Ti4+리자체대량장직접영향양품중정립적생장방향,대양품중공극영향불명현。개전성능방면,불동체환리자개전성능최가상태출현재불동체환량적정황하(m위비례계수):재Zr4+리자체환량위2m시,개전상수위177.4177,개전손모위0.00034;Sn4+리자체대량위1m시,개전상수위174.9671,개전손모위0.00038;Ti4+리자체대량위4m시,개전상수위188.4959,개전손모위0.00027。
In this article, we used solid state method getting BiLiMg(Nbx Mx )O ceramic, which base ceramic. Mainly study on the different dielectric properties of BMN, when Zr4+, SniP, Ti4+ instead of NbS+. The result shows that when the replace quantity is a little, the phase structure is pyrochlore structure. With the Zr4+ ,Sn4+ increase, more interspace appear. But if change the quantity of Ti4+ , the grain growth di- rection will show diversity. What is more, the quantity of interspace changes less. With the different replace ion, different quantity engender different dielectric properties. When the quantity of Zr4+ is 2m, the dielectric constant is 177. 4177, and the dielectric loss is 0. 00034. When the quantity of Sn4e is lm, the dielectric con- stant is 174. 9671, and the dielectric loss is 0. 00038. When the quantity of Tin+ is 4m ,the dielectric constant is 188. 4959, and the dielectric loss is 0. 00027. The m is scale factor.