模具工业
模具工業
모구공업
DIE & MOUID INDUSTRY
2014年
11期
26-28
,共3页
片状弧形结构件%回弹%加强筋%冲压工艺%模具结构
片狀弧形結構件%迴彈%加彊觔%遲壓工藝%模具結構
편상호형결구건%회탄%가강근%충압공예%모구결구
flaky arc-shaped structural part%springback%rib stiffener%stamping process%mould structure
针对片状弧形结构件在成形中容易出现回弹的问题,分析了制件成形时回弹产生的原因,采用增设加强筋、改善冲压工艺和模具结构等措施,使制件成形时回弹得到了很好的控制。
針對片狀弧形結構件在成形中容易齣現迴彈的問題,分析瞭製件成形時迴彈產生的原因,採用增設加彊觔、改善遲壓工藝和模具結構等措施,使製件成形時迴彈得到瞭很好的控製。
침대편상호형결구건재성형중용역출현회탄적문제,분석료제건성형시회탄산생적원인,채용증설가강근、개선충압공예화모구결구등조시,사제건성형시회탄득도료흔호적공제。
The springback reason of a flaky arc-shaped structural part in the forming was an?alyzed. The forming springback of the part was well controlled after adding the rib stiffen?er, improving the stamping process and mould structure.