国际生物医学工程杂志
國際生物醫學工程雜誌
국제생물의학공정잡지
INTERNATIONAL JOURNAL OF BIOMEDICAL ENGINEERING
2013年
6期
336-339
,共4页
王立伟%李跃杰%高用贺%张明蓉
王立偉%李躍傑%高用賀%張明蓉
왕립위%리약걸%고용하%장명용
导抗%校准%探测音%校准腔
導抗%校準%探測音%校準腔
도항%교준%탐측음%교준강
Immittance%Calibration%Probe tone%Calibration chamber
目的 设计耳声导抗校准算法,以减少由于耳机及器件等非线性引起的误差.方法 采用数字化检测系统设计,对不同容积校准腔(0.5、2.0、5.0 ml)进行检测,根据校准腔的数值对耳声导抗信号进行数字校准算法处理,生成校准数据表,通过输入耳声导抗值可查表进行线性校准.结果 在低频探测音测量时,鼓室图功能测量结果准确,对不同容积校准腔进行测量,误差均≤1%.结论 耳声导抗校准算法提高了系统检测精度,可为临床诊断提供可靠依据.
目的 設計耳聲導抗校準算法,以減少由于耳機及器件等非線性引起的誤差.方法 採用數字化檢測繫統設計,對不同容積校準腔(0.5、2.0、5.0 ml)進行檢測,根據校準腔的數值對耳聲導抗信號進行數字校準算法處理,生成校準數據錶,通過輸入耳聲導抗值可查錶進行線性校準.結果 在低頻探測音測量時,鼓室圖功能測量結果準確,對不同容積校準腔進行測量,誤差均≤1%.結論 耳聲導抗校準算法提高瞭繫統檢測精度,可為臨床診斷提供可靠依據.
목적 설계이성도항교준산법,이감소유우이궤급기건등비선성인기적오차.방법 채용수자화검측계통설계,대불동용적교준강(0.5、2.0、5.0 ml)진행검측,근거교준강적수치대이성도항신호진행수자교준산법처리,생성교준수거표,통과수입이성도항치가사표진행선성교준.결과 재저빈탐측음측량시,고실도공능측량결과준학,대불동용적교준강진행측량,오차균≤1%.결론 이성도항교준산법제고료계통검측정도,가위림상진단제공가고의거.
Objective To reduce the error caused by the non-linearity of headphone and device via the design of calibration algorithm for acoustic immittance.Methods Values of calibration chambers with different volumes (0.5,2.0 and 5.0 ml) were measured using the digital detection system.Then,the calibration data tables,for linearity calibration with inputting the values of acoustic immittance,were produced by means of processing the signal of acoustic immittance using the digital calibration algorithm based on the values from the calibration chambers,Results With the low frequency probe tone measurement,it was confirmed that the range of error among various calibration chambers with different volumes was 1%.Conclusion The calibration algorithm enables the improving of the detection accuracy and provides the reliable data for further clinical application.