机械管理开发
機械管理開髮
궤계관리개발
MECHANICAL MANAGEMENT AND DEVELOPMENT
2013年
1期
69-70
,共2页
王瑞栋%孔方桂%高志红%魏垣伟
王瑞棟%孔方桂%高誌紅%魏垣偉
왕서동%공방계%고지홍%위원위
最终热处理%畸变%控制措施
最終熱處理%畸變%控製措施
최종열처리%기변%공제조시
final heat treatment%distortion%improvement measure
针对影响热处理畸变因素采用多因素归纳分析法和热处理前后工序尺寸数据统计比较法,找出了影响热处理畸变的因素和热处理畸变规律.通过采取加严控制热处理工艺参数、减少热处理畸变,并在热处理前调整加工尺寸,补偿热处理畸变等措施,解决了零件的热处理变形;同时对已产生变形的零件,通过设计热校正工装,实施热压力校正,对因畸变而尺寸超差的零件进行纠正.
針對影響熱處理畸變因素採用多因素歸納分析法和熱處理前後工序呎吋數據統計比較法,找齣瞭影響熱處理畸變的因素和熱處理畸變規律.通過採取加嚴控製熱處理工藝參數、減少熱處理畸變,併在熱處理前調整加工呎吋,補償熱處理畸變等措施,解決瞭零件的熱處理變形;同時對已產生變形的零件,通過設計熱校正工裝,實施熱壓力校正,對因畸變而呎吋超差的零件進行糾正.
침대영향열처리기변인소채용다인소귀납분석법화열처리전후공서척촌수거통계비교법,조출료영향열처리기변적인소화열처리기변규률.통과채취가엄공제열처리공예삼수、감소열처리기변,병재열처리전조정가공척촌,보상열처리기변등조시,해결료령건적열처리변형;동시대이산생변형적령건,통과설계열교정공장,실시열압력교정,대인기변이척촌초차적령건진행규정.
@@@@The multi-factor inductive analysis method on which influence heat treatment distortion and the statistical comparison method by which are compared serial dimensions before and after heat treatment process are used in this article. The multi-factor influencing on HT distor?tion and its regularities are found out. And strict parameter in heat treatment presses is used to reduce HT distortion, and meanwhile the method of compensating HT distortion through adjusting machining dimension is taken to resolve distortion problem finally. Simultaneously in order to rectify some deformed components and repair faulty parts, hot pressure straightening way should be used by means of designing fixture.