机械管理开发
機械管理開髮
궤계관리개발
MECHANICAL MANAGEMENT AND DEVELOPMENT
2013年
1期
108-109
,共2页
参数干扰%PID控制%自整定
參數榦擾%PID控製%自整定
삼수간우%PID공제%자정정
parameter perturbations%PID control%self-tuning
针对PID炉温控制系统处于非稳定状态、自整定作用严重滞后的现象,根据控制现场实时情况,采取人为调出内存,结合长期实验结果,直接将内存PID参数进行适度修正,使其控制系统迅速达到现时控制精度.
針對PID爐溫控製繫統處于非穩定狀態、自整定作用嚴重滯後的現象,根據控製現場實時情況,採取人為調齣內存,結閤長期實驗結果,直接將內存PID參數進行適度脩正,使其控製繫統迅速達到現時控製精度.
침대PID로온공제계통처우비은정상태、자정정작용엄중체후적현상,근거공제현장실시정황,채취인위조출내존,결합장기실험결과,직접장내존PID삼수진행괄도수정,사기공제계통신속체도현시공제정도.
@@@@This article is for PID temperature control system in a non-steady state, self-tuning role seriously lagging behind the phenomenon, according to real-time status of the control site, take artificially bring up the memory, combined with the long-term results of the experiment directly to the memory of PID parameters for moderate correction control system to quickly reach the current control accuracy of the method.
