价值工程
價值工程
개치공정
VALUE ENGINEERING
2013年
10期
33-35
,共3页
动力头%制动装置%斜面增力机构%开闭可控胶套卡盘%间隙密封%双通道配油套
動力頭%製動裝置%斜麵增力機構%開閉可控膠套卡盤%間隙密封%雙通道配油套
동력두%제동장치%사면증력궤구%개폐가공효투잡반%간극밀봉%쌍통도배유투
head power%braking apparatus%slope force-amplifier%open and closed controllable rubber sleeve chuck%clearance seal%double-channel oil distributor
为了研制出适合煤矿井下水平定向钻进的定向钻机,文章对ZYWL-6000D型水平定向钻机的关键元部件动力头进行了研究;文章通过类比法确定了动力头总体结构,并利用斜面增力机构设计了新型制动装置,利用液控单向阀设计了新型开闭可控式胶套卡盘,并通过双通道配油套实现了对卡盘的控制;样机实验室实验中,动力头的最大传递转矩达到6901N.m,制动装置制动转矩达到4002N.m;样机工业型试验中,动力头累计无故障钻进14000米;实验室实验和工业性试验结果表明,该动力头整体性满足煤矿井下千米定向钻进施工要求.
為瞭研製齣適閤煤礦井下水平定嚮鑽進的定嚮鑽機,文章對ZYWL-6000D型水平定嚮鑽機的關鍵元部件動力頭進行瞭研究;文章通過類比法確定瞭動力頭總體結構,併利用斜麵增力機構設計瞭新型製動裝置,利用液控單嚮閥設計瞭新型開閉可控式膠套卡盤,併通過雙通道配油套實現瞭對卡盤的控製;樣機實驗室實驗中,動力頭的最大傳遞轉矩達到6901N.m,製動裝置製動轉矩達到4002N.m;樣機工業型試驗中,動力頭纍計無故障鑽進14000米;實驗室實驗和工業性試驗結果錶明,該動力頭整體性滿足煤礦井下韆米定嚮鑽進施工要求.
위료연제출괄합매광정하수평정향찬진적정향찬궤,문장대ZYWL-6000D형수평정향찬궤적관건원부건동력두진행료연구;문장통과류비법학정료동력두총체결구,병이용사면증력궤구설계료신형제동장치,이용액공단향벌설계료신형개폐가공식효투잡반,병통과쌍통도배유투실현료대잡반적공제;양궤실험실실험중,동력두적최대전체전구체도6901N.m,제동장치제동전구체도4002N.m;양궤공업형시험중,동력두루계무고장찬진14000미;실험실실험화공업성시험결과표명,해동력두정체성만족매광정하천미정향찬진시공요구.
The head power is the key component of the ZYWL-6000D horizontal directional drilling machine used in coal mining. By analogy method, the structure of the power head is schemed, and a slope force-amplifier is used in braking, the rubber sleeve chuck in controlled by a pilot-controlled check valve to open and close through a double-channel distributor, in the experiment of the model machine, the maximum torque of the head power is up to 6901N.m, the braking force is up to 4002N.m. In the industrial test, the drilling machine has drilled more than 14000m, and the head power works well. The experimentation and the industrial test show that the head power is qualified to drill with the horizontal directional drilling machine.