装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2013年
2期
56-61
,共6页
李冬伟%任国全%郑鹏翱%李本
李鼕偉%任國全%鄭鵬翱%李本
리동위%임국전%정붕고%리본
平顺性试验%振动测试%车载光电设备
平順性試驗%振動測試%車載光電設備
평순성시험%진동측시%차재광전설비
riding comfortable test%vibration measurement%vehicle-mounted photoelectric device
对某车载光电探测设备进行了平顺性试验研究.根据该光电设备的结构特点和性能要求,在旋转机座、俯仰转台和红外望远镜上选取3个测点,经试验得到了这3个测点在不同路况、不同车速情况下的加速度数据.通过对试验数据的整理,得出光电探测仪不同部位及整机的振动强度随车速变化曲线,为车载光电平台的减、隔振设计提供参考.
對某車載光電探測設備進行瞭平順性試驗研究.根據該光電設備的結構特點和性能要求,在鏇轉機座、俯仰轉檯和紅外望遠鏡上選取3箇測點,經試驗得到瞭這3箇測點在不同路況、不同車速情況下的加速度數據.通過對試驗數據的整理,得齣光電探測儀不同部位及整機的振動彊度隨車速變化麯線,為車載光電平檯的減、隔振設計提供參攷.
대모차재광전탐측설비진행료평순성시험연구.근거해광전설비적결구특점화성능요구,재선전궤좌、부앙전태화홍외망원경상선취3개측점,경시험득도료저3개측점재불동로황、불동차속정황하적가속도수거.통과대시험수거적정리,득출광전탐측의불동부위급정궤적진동강도수차속변화곡선,위차재광전평태적감、격진설계제공삼고.
@@@@The riding comfort test of vehicle-mounted photoelectric device was carried out. According to the construction characteristic and performance requirement of the photoelectric device, three different measuring points were selected in the rotated base, pitch table, and infrared telescope. The acceleration response data of different measuring points were collected with different road condition and different vehicle speed. Changing curves of vibration strength with speed of different points and complete system of the photoelectric device were obtained, which provide reference data for damp design of photoelectric device platform.