CAJ | 학술논문

利用有限元分析法对某煤矿长壁工作面的大型带式输送机进行了动态模拟,分析了长距离带式输送机满载工况下输送带的动张力特性.通过分析得出:满载启动时,输送带松边与紧边的最大速度差为1畅374 m/s;启动过程中张紧装置的拉紧行程为8畅46 m ;输送带第151个离散单元的张力最大,为432畅91 kN ,张紧装置的最大张力不应大于432畅9 kN.
이용유한원분석법대모매광장벽공작면적대형대식수송궤진행료동태모의,분석료장거리대식수송궤만재공황하수송대적동장력특성.통과분석득출:만재계동시,수송대송변여긴변적최대속도차위1창374 m/s;계동과정중장긴장치적랍긴행정위8창46 m ;수송대제151개리산단원적장력최대,위432창91 kN ,장긴장치적최대장력불응대우432창9 kN.
@@@@In this paper ,the dynamic simulation of a large belt conveyor is carried out by using finite element method ,which is used in a coal mine long wall face ,and the dynamic tension characteristic under the condition of full load is analyzed .The conclusion of the study are following :With the full load startup ,the maximum speed difference between conveyor belt loose side and compact side is 1 .374 m/s ,the displacement of the tension device is 8 .46 m ;The maximum tension in the 151th discrete unit is 432 .91 kN ,and the tension of the 600th unit is 68 .60 kN ,the maximum tension of the tension device should not be greater than 432 .9 kN .